close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

تا بعدی

Starting the Planking: A Steep Learning Curve | Poulsbo Boat Project - Episode 13

549 بازدیدها· 15/11/26
nomadboatbuilding
0

We're finally starting to plank the Poulsbo Boat Project. The inwales and thwart risers are shaped, the cedar strips are ready, and it's time to start turning the moulds into a hull. There are a few things to prepare before the first plank goes on. I'm masking off the inwales and thwart risers so I can remove them later for interior fairing and fibreglassing. I'm also scarfing the planking stock with a new jig I made to hold pairs of strips securely while I cut the joints. The real challenge begins when I start fitting the planks. This hull has a lot more shape and twist than the canoe-style strip-building process I'm familiar with. I started at the sheer and worked towards the keel, but I'm quickly discovering that a beamier hull needs a different approach to establishing the plank runs. Steaming helps get the cedar into shape, but it isn't the whole answer. I'm experimenting with back bevels and tapers to make the planks wind into position, and learning as I go. I also make some changes to the steam box setup and rethink my choice of fasteners after finding that the two-inch brads are occasionally coming through the planking. This is very much a case of working through the problems as they arise. There are things I would do differently if I were starting over, but each step is teaching me something about strip-building a hull with this much shape. **In this episode:** - Preparing the inwales and thwart risers for removal - Building and using a scarfing jig - Scarfing cedar-strip planking stock - Why this hull needs steamed planks - Setting up a longer steam box - Fitting the first planks and managing twist - Using back bevels and tapers to control plank shape - Changing fasteners to shorter crown staples The Poulsbo boat is a modern cedar-strip interpretation of a 1950s-era sport fishing boat originally built by Ronald Young in Poulsbo, Washington, using traditional carvel construction. We're building this version with cedar strip and fibreglass inside and out. **Follow the build:** Poulsbo Boat Project playlist: https://youtube.com/playlist?list=PLnOoJJKdbR4JZFfEMWhXjloa0LhCp0GPI&si=wVjR0gySMlqsx2jw Website: https://nomadboatbuilding.com/ Patreon: https://www.patreon.com/nomadboatbuilding Instagram: https://www.instagram.com/nomadboatbuilding/ If you enjoy following the process, including the experiments, mistakes and solutions along the way, consider supporting the channel. Join me on Patreon. Thanks for watching, and I'll see you in the next episode. 0:00 The challenge of strip-building this hull 0:15 Back to the Poulsbo Boat Project 0:41 Preparing the inwales and thwart risers 1:14 Masking off the members before planking 2:17 Making a new scarfing jig 3:09 Keeping track of the planking stock 4:38 Gluing the scarf joints 5:09 Using Mylar to separate the strips 5:51 A steady scarfing routine 6:47 Why this hull needs steamed planks 7:20 A lesson in choosing the right planking approach 7:51 Finding a neutral plank line 9:02 Improving the steam-box setup 10:07 The first planks go on 10:50 Managing the twist at the bow and stern 11:30 Extending the steam box 12:05 How long to steam the planks 12:59 Changing the steam-box orientation 14:22 Getting the longer steam box running 15:53 Dampening the planks before steaming 16:27 Protecting the clamp pads 17:42 Preparing clamps before fitting a hot plank 18:33 Working out how to hold the plank in place 20:41 The first signs of trouble 21:00 Why the bow planks aren't fitting 23:52 Using back bevels and tapers to control twist 25:28 An experiment that works 26:07 Shaping the planks to fit 30:13 A new day in the shop 30:30 The challenges of fitting the planks 31:05 Changing from brads to crown staples 32:40 Why I'm using stainless fasteners 34:01 Would carvel construction have been easier? 34:18 Live and learn

بیشتر نشان بده، اطلاعات بیشتر

 0 نظرات sort   مرتب سازی بر اساس


تا بعدی