1. Remove the old caulking. We use a special tool from @teakdeckingsystems. 2. If your deck is both screwed and glued, considwe removing the screws. We chose to remove the screws since they only created a possibility for water to enter the construction. 3. Fill out every screw hole with epoxy. During the renovation, we learned it would be a good idea to fill the holes with epoxy as soon as you remove the screws to ensure you seal every single hole. 4. Route between all the teak strips. We routed all the way to the gel coat to have as much wood to work with as possible. We used a fine cutter where the caulking was across the grain. 5. Seam sanding. It helps remove the remaining caulking and gives the teak a fresh bonding surface. 6. Masking the teak strips. We chose to mask the wood to reduce the sanding process later on because we knew the teak wasn’t very thick. 7. Cleaning off with acetone. This helps remove dust and gives the caulking the best conditions to adhere to the wood and cure. 8. Start caulking. We used an air compressor caulking gun. It makes the process easier for large surfaces that need caulking - we used SIS 440 from @teakdeckingsystems. We also used a 3D-printed applicator for the caulk head, which minimizes the amount of caulking used. I could only find it on @hfindustrimarineaps website. 9. “Spoon” caulk further into the seams. We used a flexible putty knife to smoothing the caulking. 10. Pull off the masking. While removing the tape, we used scissors to cut just before the area where it hadn’t been caulked yet. 11. Remove the top of the caulking. We used a sharp stanley knife. We did this to minimize sanding, just as we did with masking. 12. Sanding with grit 80. We used the fine cutter’s sanding head for all the edges and an orbital sander for the larger areas. Side note: Sanding with grit 40. We believe the best way is to sand before routing to even out the wood. Unfortunately, we had many places where the wood was so worn out that it wouldn’t have been possible to follow the old tracks with the router after sanding. #diy #sailing #sailingdiy #teak #teakdeck #sailingdenmark #boatwork #shortoftheday

0

0

0

694

The Scandinavian marine industry produces boats that are practical for its own distinct waters, which just happen to be extremely popular elsewhere as well. Aboard the Ocean Master 630, boats.com reviewer Alex Smith describes the stern anchor locker, the bow step to enable mooring bows-to and the space and comfort of this 'driving machine'. Click on the video to watch for yourself. http://uk.boats.com/boat-content/2013/11/ocean-master-630-first-look-video/ For more boat videos, visit uk.boats.com.

0

0

0

6,860

It's time to anti-foul the bottom of the boat, but first some sanding is required!

0

0

0

572

We like to cook and we love Ice Cream... so we have on our boat icemaker... enjoy our recipes. ... Hit the Bell Button 🔔 to be informed when the next video comes out. Leave your comments bellow 🔽 If you like what we are doing - buy us a coffee! https://www.buymeacoffee.com/sailingk... Grab some merch http://sailingkanoa.com/spreadshirt/#!/ ... We are sailing on our catamaran, a Lagoon 380 around the world. We like to explore new places, we like to cook with people, who share their culture by showing us national recipes and tell a story. And if you like it - thumbs up👍🏼 and SUBSCRIBE to our adventure! https://www.youtube.com/channel/UC3Fd3ndXzJKxEjw79qwe3-Q?sub_confirmation=1 FOLLOW US: our daily life on Instagram @sailingkanoa: https://www.instagram.com/sailingkanoa/ our life on Facebook "Sailwithus Recipes and live on a boat": https://www.facebook.com/sailwithus our recipes on Pinterest https://www.pinterest.com/sailingkanoa/ our home page and more information about us: http://sailingkanoa.com/ Follow our boat on NOFOREIGNLAND: https://www.noforeignland.com/boat/6293528768413696 WE USE Camera https://www.amazon.es/Xiaomi-Poco-F2-Pro-Smartphone/dp/B088HGRBHJ?th=1 Stabilization https://www.dji.com/osmo-mobile-3 #shorts #watermelonsorbet #sailingkanoa #homemafeicecream

0

0

0

2,079

Feliz Día del Amor y la Amistad 2021 Google Ads #short

0

0

0

94

http://www.nauticabellandi.it L'allestimento di questa Beneteau Antares 7.80 monta il pack electronic 2012 che consiste in un apparecchio combo Lowrance Hds 7 (eco e gps) collegato all'impianto stereo tramite il Sonic Hub che permette di controllare tutte le funzioni radio direttamente dallo schermo dell'Hds 7 situato al centro della plancia di comando. Non manca inoltre la bussola situata in posizione ben visibile e la strumentazione abbinata al motore (contagiri, trim e strumento benzina). Per maggiori informazioni: www.nauticabellandi.it vendite@nauticabellandi.com +39 0309120364

0

0

0

3,452