close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Celana pendek Membuat

1. Remove the old caulking. We use a special tool from @teakdeckingsystems. 2. If your deck is both screwed and glued, considwe removing the screws. We chose to remove the screws since they only created a possibility for water to enter the construction. 3. Fill out every screw hole with epoxy. During the renovation, we learned it would be a good idea to fill the holes with epoxy as soon as you remove the screws to ensure you seal every single hole. 4. Route between all the teak strips. We routed all the way to the gel coat to have as much wood to work with as possible. We used a fine cutter where the caulking was across the grain. 5. Seam sanding. It helps remove the remaining caulking and gives the teak a fresh bonding surface. 6. Masking the teak strips. We chose to mask the wood to reduce the sanding process later on because we knew the teak wasn’t very thick. 7. Cleaning off with acetone. This helps remove dust and gives the caulking the best conditions to adhere to the wood and cure. 8. Start caulking. We used an air compressor caulking gun. It makes the process easier for large surfaces that need caulking - we used SIS 440 from @teakdeckingsystems. We also used a 3D-printed applicator for the caulk head, which minimizes the amount of caulking used. I could only find it on @hfindustrimarineaps website. 9. “Spoon” caulk further into the seams. We used a flexible putty knife to smoothing the caulking. 10. Pull off the masking. While removing the tape, we used scissors to cut just before the area where it hadn’t been caulked yet. 11. Remove the top of the caulking. We used a sharp stanley knife. We did this to minimize sanding, just as we did with masking. 12. Sanding with grit 80. We used the fine cutter’s sanding head for all the edges and an orbital sander for the larger areas. Side note: Sanding with grit 40. We believe the best way is to sand before routing to even out the wood. Unfortunately, we had many places where the wood was so worn out that it wouldn’t have been possible to follow the old tracks with the router after sanding. #diy #sailing #sailingdiy #teak #teakdeck #sailingdenmark #boatwork #shortoftheday

justoceans

0

0

694

Pacific Swift and Pacific Grace

tallshipspacific

0

0

116

► Las Palmas, almost an unavoidable stopover on the Atlantic route from Europe, welcomed thousands of sailors during the month of November, when the north-easterly trade winds begin to set in. These crews included a total of 1,300 sailors flying the ARC colors (ARC and ARC +) aboard 253 sailboats. During our visits to the pontoons, we got a measure of the Starlink revolution: only one entrant was equipped last year, compared with 80% of the fleet today... The quality of the connections offered by this satellite operator makes it possible to efficiently follow weather developments, keep in touch those ashore and even work as if at the office! For the first time since we’ve been following ocean-going crews, Vincent, aboard Outremer 51 Piment Rouge, will be sharing his transatlantic passage with us via his videos, which we’ll be relaying. Another special feature of this 2023 edition will be the large number of diesel cans strapped to the guardwires: in a context of very light winds, unusual for the season, the engines (authorized with a penalty for the Multihull category) are likely to be much in demand aboard many of the multihulls. After two weeks of seminars, meetings and safety inspections, the atmosphere on the docks was becoming truly electric during the last three days running up to the start. Studying the weather, stocking up on fresh supplies, washing fruit and vegetables - everyone realized that there was an ocean to cross... Some crew members are more Zen than others: the oldest sailor in the ARC, Joff Hutchinson, 89, declared: “I’ve been sailing for 82 years and I’ve always wanted to cross the Atlantic. Now that my sons have retired, there’s no better time”. The start was relaxed, with the fleet setting off in a light southerly breeze and glorious sunshine, guaranteeing a smooth start for everyone to get their sea legs. ► Become a FREE SUBSCRIBER to Multihulls World's YouTube page now - https://www.youtube.com/c/MultihullsWorld ► Log on to our website to discover over 500 multihulls tests! Subscribe to our newsletter to take advantage of our promotions and boat show invitations! https://www.multihulls-world.com/ ► Follow us on Facebook! https://m.facebook.com/MultihullsWorldMag/?locale2=fr_FR ► Discover us on Instagram! https://www.instagram.com/multihulls_world/ ► Follow our multi news on X - https://twitter.com/multihullsworld?lang=fr ► Let’s talk about business https://www.linkedin.com/company/multicoques-mag-multihulls-world/ ► Like us on TikTok! https://www.tiktok.com/@multihullsworldmag #arcrally #multicoquesmag #multihullsworld #catamaran #transatlantic #bluewatersailing #trimaran #laspalmas #santalucia #emmanuelvandeth #catamaranpimentrouge #outremeryachting #outremer51

multihullsworld

0

0

301

0

teammalizia

0

0

7,100

0

coralialiveaboard3844

0

0

22

François Gabart profite du paysage et des bons vents dont il profite avant le jibe et la porte Crozet.

vendeeglobetv

0

0

759