How to Eliminate Thickness Planer Snipe (Without Modifying Your Planer)

Howdy folks! I'm Mark Reuten from Nomad Boat Building. In this episode of the Poulsbo Boat Project, I'm tackling one of the most common frustrations in woodworking: thickness planer snipe. I explain why snipe happens, why it isn't always practical to eliminate with elaborate machine setups, and several simple shop techniques I use to prevent it when milling boat parts. We'll cover lifting the stock during the cut, feeding boards diagonally, using sacrificial battens, and building a simple planer sled for short or thin workpieces. These are practical methods that work well in a real boat shop without requiring expensive modifications to your planer. If you're building boats, woodworking in a small shop, or simply trying to get cleaner results from your thickness planer, I hope you'll find a few useful ideas here. If you'd like to help support these videos, consider joining me on Patreon: Join me on Patreon https://www.patreon.com/nomadboatbuilding Website https://nomadboatbuilding.com/ Chapters 00:00 Why thickness planer snipe happens 00:48 Why extension tables aren't always practical 01:32 Planning around snipe with extra material 02:17 Technique 1: Lift the board during the cut 02:55 Technique 2: Feed the board diagonally 03:30 Technique 3: Sacrificial battens 04:47 Technique 4: A simple planer sled 05:57 Final thoughts #BoatBuilding #Woodworking #ThicknessPlaner #WoodworkingTips #NomadBoatBuilding #PoulsboBoat #PlanerSnipe #WorkshopTips