Mirage in Martinique — Fixes, Upgrades & Getting Ready for the New Season!

After spending two years cruising the Caribbean, Mirage is getting some well-deserved attention in beautiful Martinique. In this video, I walk you through all the repairs, upgrades, and new tech we installed to prepare for an exciting new sailing season. 🔧 Upgrades & Fixes Completed: New Spinnaker Pole — replacing the old one that snapped during our Atlantic crossing. Sail Check & Repairs — all sails inspected and repaired by Incidence Sails. Starlink Mini — lower power draw, high efficiency, and the latest Starlink tech onboard. Victron 110V to 240V autotransformer — now to power all electrical systems via 110V shore power. Ultrasonic Anemometer (CV7) from LCJ Capteurs — no moving parts, super accurate wind readings. Full Engine & Generator Service — oil, filters, impellers for the Volvo engine and MASE generator. Yacht Devices NMEA2000 Wi-Fi Bridge — all boat data now available on Wi-Fi, perfect for the Navionics app. SodaStream Onboard — sparkling water anytime at the push of a button. Haul-Out — to complete the stern thruster plate recall by Amel. New Rope Cutter Installed — extra protection for the prop shaft. Leaking Hatches Fixed — all rubber seals replaced by Amel under warranty. Sensor Blue Temperature & Humidity System — monitoring all critical areas on the boat. With everything polished, upgraded, and ready, Mirage is finally set for a test sail and the start of the new season! 🌊 Subscribe to follow my journey: 👉 https://www.youtube.com/@1RURO