In this video we’re sailing upwind in 35+ knots of breeze in Johnstone Strait during the VanIsle360 race with a double-reefed main sail and storm jib. A crew member is on the foredeck securing the #3 jib we had previously been flying in the short video https://youtube.com/shorts/VRAEp8M49Y4, but ripped in half. The head literally ripped right off. He is wearing a harness and tether! The sky is completely blue, but everybody is still completely soaked from the spray. Lots of sails were destroyed in that leg, including the #3 jib that is now on the foredeck. Disclaimer: - This content is offered solely for your education and entertainment. - There are no warranties, expressed or implicit, about any content or its fitness for a particular purpose. - There are risks of injury, death, drunkenness, and financial hardship involved in sailing. - The skipper is always responsible for the safety of their vessel and crew. - Sailing Tips is not responsible or liable in any way for anything that happens on or anywhere near your boat or any boat that we are not in command of. #shorts #sailing #fast #upwind #stormjib #reefed #sailingtips

0

0

0

5,053

0

0

0

0

720

Did you know our boats don’t have a hull-to-deck joint? We don’t make our yachts like other manufacturers, we make them better, stronger, and to last longer. One of the ways we distinguish our yachts from the mass-produced yachts is the way we join the hull to the deck. Some manufacturers bond the hull to the deck with structural adhesive, some bond and use screws, some bond and bolt. We are one of a few manufacturers who bond and then laminate the deck to the hull. Doing this makes the hull stronger; the hull and the deck become a single, strong structure. It is easier and quicker to fit the interior of a yacht before the deck is attached, but doing this means that the deck will have to be joined with the bulkheads and some of the interior in place – this makes the join harder to access. We join the hull and deck as one of the first parts of the build process; the whole join can be laminated and we know there will be no voids. We then build our yachts with the deck attached; everything for the interior – the bulkheads, every item you see in the interior, including the engine – comes through the companionway or the roof in the deck saloon. #WeAreSirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

0

0

0

4,378

0

0

0

0

6,917

0

0

0

0

164

Monterey 214 FSC https://www.scanboat.com/en/17420977

0

0

0

902