
Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
Cockpit Sole Part 2: Why Station 7 Is Bonded Differently | Wooden Shoe Build
Part 2 of the Cockpit Sole. In Part 1 we built the sole — now I show WHY you must cut the stations to final size BEFORE mounting the stringers. Plus the Station 8 mistake fixed, and how I bond Station 7 & 12 differently from the Nexus Marine plans. Watch Part 1 here: https://youtu.be/k1GkgPvunBs Build in the Mexican jungle — Wooden Shoe Budget Boat Build | JungleRanch Playlist: https://www.youtube.com/watch?v=k1GkgPvunBs&list=PL7QoZ0Wv5Rm_X6EvXHs66xBrogrH4CabH&index=31 The Wooden Shoe is a 25ft powerboat build in the Mexican jungle. No fancy workshop — just Chechen wood, Cumaru, epoxy and a bandsaw without a guide. IN THIS VIDEO: Why station height must be corrected before stringers Station 8: wrong marks vs. correct cockpit sole height (side-by-side) How and why I bond Station 7 to the cockpit sole — different from the design Same bonding method between Station 12 and the sole Stringers around the hatches + thin stringers under Stations 8, 9, 10 (not 11) Stringers from Station 12 to hatch opening Helm / passenger seat blocks for solid screw fixing 2 layers of epoxy on everything + wire holes cut out Next: mounting the stations & cockpit trough plywood #Jungleranch #Cockpit sole #Boat stringers #Wooden boat build #woodenboatbuilding #boatbuilding #woodenshoe #plywoodboatbuilding #woodenshoe #jungleranch 0:00 Introduction 0:45 Station 8 — wrong vs correct height marks Why cut stations BEFORE stringers? 0:31 Station 8 — wrong vs correct height marks 0:54 Why cut the stations before glueing stringers? 1:36 All stations are cut. Hatches stringers first! 1:51 Start glueing stringers 2:09 Bonding Station 7 to the cockpit sole (why I do it differently) 3:01 Station 12 to cockpit sole — same method 3:23 Thin stringers under Stations 8, 9, 10 3:54 All stringers anf filler woods for the water channels 4:17 Helm / passenger seat blocks 4:40 Two layers of Epoxy — full seal 4:57 Cutting holes for wiring 5:15 Next up: Stations + Cockpit Trough plywood 5:52 Outro

