close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Şort oluşturmak

Have you ever wondered how we get the grain pattern on our bulkheads to match the doors? It’s easy really, our doors are cut out from the bulkheads. Our bulkheads are laminated in place, they are made of two, 15mm thick marine grade plywood panels bonded together, there is also 0.9-1.2mm thick Sapele mahogany veneer on each side. This is the wood you see once the bulkhead is finished and we like it to match the door, perfectly. Before the bulkhead can be fitted, if there is a doorway, it needs to be added. This poses a few problems. Because every boat is individually built, one boat differs from the next so each yacht uses wood from the same tree, and this keeps the colour and grain pattern consistent throughout, but cutting out a door from a bulkhead would cause the bulkhead to flex. Even at over 30mm (1 1/4 in) thick a little flex could cause a problem and make it difficult to close a door once it’s installed. For this reason, we cut out the door, add the laminated Sapele mahogany frame to the bulkhead and 6mm of solid Sapele mahogany around the door and then fit the door into the bulkhead and secure the two together. Only then do we fit the bulkhead into position on the yacht. Once the bulkhead is securely laminated in place, the doors are removed and labelled before varnishing. The doors and the bulkheads are varnished separately. The bulkheads remain unvarnished to allow the GRP laminate and glues that attach the bulkhead to the hull to bond fully with the wood. Once the bulkheads are laminated in place, then they can be varnished, by hand and brush to give a thick, hard-wearing finish. #wearesirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

siriusyachts

0

0

2,636

0

sailblazer

0

0

517

🌍 Join the Outremer adventure! Get stories, news & events straight to your inbox: http://bit.ly/45hYAJk 🔗 All useful links are available in the description via our Linktree!

catamaransoutremer

0

0

641

Leaving a mooring from Martham Ferry, so quiet we can hear the excited children on the boat!

marthamferry2986

0

0

1,904

0

catamaranelmaderito

0

0

13

► Essai complet dans Multicoques Mag N°219 : https://www.multicoques-mag.com/essais/catamaran/bali-catsmart-small-is-beautiful ► Le constructeur devenu numéro 3 (voire 2 ?) mondial complète encore sa gamme… mais cette fois, par le bas, en présentant un nouveau modèle de 38 pieds. Un petit frère pour le Bali Catspace qui se permet quelques innovations inédites, comme l’adoption de deux postes de barre, l’optimisation de la surface de voilure avec une grand-voile à ras du rouf – pas de flybridge, du coup. En revanche, le pontage intégral et la porte Bali basculante sont toujours au rendez-vous. A l’intérieur, c’en est bien fini du tout location ; le constructeur affiche bien des classiques versions quatre et trois cabines, mais surtout une étonnante déclinaison avec deux cabines Propriétaires seulement. Le Bali Catsmart démontre (enfin !) l’intérêt de multicoques compacts, bien moins chers et plus faciles à entretenir que les grands modèles. Le Catsmart rejoint donc le C-Cat 37, l’Excess 11 et l’Aventura 37 (trois modèles attendus au salon). Bali présentera à La Grande-Motte à partir du 12 avril 2023 tous ses modèles voile, excepté le 4.8 – opportunément exposé par Dream Yachts Worldwide. En revanche, aucun modèle de la gamme Power n’est annoncé... pour le moment ! ► CARACTERISTIQUES TECHNIQUES Constructeur : Chantier Catana Architecte : Xavier Faÿ Longueur : 11,78 m Longueur à la flottaison : 11,32 m Largeur : 6,46 m Tirant d’eau : 1,10 m Déplacement lège : 8,4 t Motorisation : 2 x 20/30 CV Carburant : 400 l Eau : 660 l ► Abonnez-vous GRATUITEMENT à la chaîne YouTube de Multicoques Mag dès maintenant – https://www.youtube.com/c/MultihullsWorld ► Connectez-vous à notre site Web pour découvrir plus de 500 essais ! Abonnez-vous à notre newsletter afin de profiter de nos promotions et d’invitations aux salons nautiques ! https://www.multicoques-mag.com/ ► Suivez-nous sur Facebook ! https://www.facebook.com/MulticoquesMag/ ► Découvrez-nous sur Instagram https://www.instagram.com/multihulls_world/ ► Suivez les actualités multicoques sur Twitter - https://twitter.com/multihullsworld?lang=fr ► Parlons business sur Linkedin ! https://www.linkedin.com/company/multicoques-mag-multihulls-world/ ► Likez nous sur TikTok ! https://www.tiktok.com/@multihullsworldmag @BaliCatamarans #balicatamarans #balicatsmart #catamaran #emmanuelvandeth #cruising

multihullsworld

0

0

1,965