Have you ever wondered how we get the grain pattern on our bulkheads to match the doors? It’s easy really, our doors are cut out from the bulkheads. Our bulkheads are laminated in place, they are made of two, 15mm thick marine grade plywood panels bonded together, there is also 0.9-1.2mm thick Sapele mahogany veneer on each side. This is the wood you see once the bulkhead is finished and we like it to match the door, perfectly. Before the bulkhead can be fitted, if there is a doorway, it needs to be added. This poses a few problems. Because every boat is individually built, one boat differs from the next so each yacht uses wood from the same tree, and this keeps the colour and grain pattern consistent throughout, but cutting out a door from a bulkhead would cause the bulkhead to flex. Even at over 30mm (1 1/4 in) thick a little flex could cause a problem and make it difficult to close a door once it’s installed. For this reason, we cut out the door, add the laminated Sapele mahogany frame to the bulkhead and 6mm of solid Sapele mahogany around the door and then fit the door into the bulkhead and secure the two together. Only then do we fit the bulkhead into position on the yacht. Once the bulkhead is securely laminated in place, the doors are removed and labelled before varnishing. The doors and the bulkheads are varnished separately. The bulkheads remain unvarnished to allow the GRP laminate and glues that attach the bulkhead to the hull to bond fully with the wood. Once the bulkheads are laminated in place, then they can be varnished, by hand and brush to give a thick, hard-wearing finish. #wearesirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

0

0

0

2,636

MOV041 Raw video. Yet to be edited.

0

0

0

4

► Multicoques Mag Hors-Série N° 24 Forever Green : il est bouclé ! ► Au sommaire : ► ESSAIS Millikan M.9, le prototype du M.10 Neel 43 Hybride Max 44SC SY62 3-Deck ModX 70 ► DOSSIERS FOREVER GREEN Les points sur les constructeurs Motorisation et équipement Antifouling et respect de l’environnement Hydrogénération : quelles hélices et quels systèmes choisir ? Refit : le nouvel eldorado de la plaisance ? ► VECU 24 h à bord d’un catamaran électrique - Leopard 46 Electric Drivz ► RUBRIQUES Au Portant Nouvelles des chantiers Nouvelles des multipowers Nouvelles des multiyachts Echos des pontons Shopping Chic et Choque – Nicolas Laap, Sunreef Yachts Liste des essais Forever Green Top 10 vidéos Forever Green ► Abonnez-vous GRATUITEMENT à la chaîne YouTube de Multicoques Mag dès maintenant – https://www.youtube.com/c/MultihullsWorld ► Connectez-vous à notre site Web pour découvrir plus de 600 essais ! Abonnez-vous à notre newsletter afin de profiter de nos promotions et d’invitations aux salons nautiques ! https://www.multicoques-mag.com/ ► Suivez-nous sur Facebook ! https://www.facebook.com/MulticoquesMag/ ► Découvrez-nous sur Instagram https://www.instagram.com/multihulls_world/ ► Suivez les actus multi sur X https://twitter.com/multihullsworld?lang=fr ► Parlons business ! https://www.linkedin.com/company/multicoques-mag-multihulls-world/ ► Likez-nous sur TikTok ! https://www.tiktok.com/@multihullsworldmag #multicoquesmag #navigation #croisiere #multicoque #essaienmer #testenmer #navigation #voile #croisiere #grandecroisiere #grandvoyage #magazine #catamaran #youtube #tiktok #trimaran #multipower #powercat #forevergreen #bateauelectrique #emmanuelvandeth #gwendorning #addictivesailing #brieucmaisonneuve #usine #chantiernaval #oceandeveloppement @modxcatamarans7969 @millikanboats6852 @LeopardCatamaran @silentyachts @maxcruisemarine @neel-trimaransgroup

0

0

0

1,260

0

0

0

0

1,034

Will Harris and Nicolas Lunven on night watch during leg 2 of The Ocean Race. The crew is sailing the new imoca Malizia - Seaexplorer to Cape Town, South Africa. Thanks for watching! Subscribe and turn On post notification to stay up to date with team Malizia

0

0

0

8,538

This whirligig looks just like the owners of the Cherubini 44 named Alliance (2016)! (And Alliance and their Cherubini 24 is also on the 'gig!!) Our boats and the whirligig are custom and handmade! We had it made by Jake Ramirez Designs. If you would like to order one, please call us at 856-764-5319.

0

0

0

82