close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

شلوار کوتاه ایجاد کردن

Check out how to remove heavy oxidation from a black Searay boat using the correct polishing technique. In any kind of polishing your technique is very important in getting high quality results. 1. Start with 2’X 2’ section 2. You want to a follow a “M” pattern going horizontally overlapping with half of the buffing pad of your last pass. 3. Cross cut vertically over the same section always allowing the product and the pad to bring you the result you are looking for so don’t apply a lot pressure and don’t rush. 4. Keep polishing with same pattern until oxidation is removed. 5. Wipe with a microfiber, if you are happy with the result move to the section. Note: There’s no easy way. You might have to take several passes there is no magic compound or polishes you just wave at a boat to make it shine. It takes a lot skill and effort to produce high quality results. Machine: Makita Polisher Products: Farecla Extra Coarse Paste Compound Follow us on IG: https://www.instagram.com/tv/Cb_6GwAjXxu/? igshid=YmMyMTA2M2Y=

themobileboatguys

0

0

107

#miniaussie #miniaussies #miniaustralianshepherd #gsd #germanshepherd

starsloop

0

0

344

While on the hard giving Epiphany's bildge a gooooood cleaning!

nbr33fans

0

0

2,357

Sea trials of a new composite nesting dinghy built with honeycomb, and fiberglass laminated with epoxy resin. Cameraman: Nano Location, Turtle Cay Marina, Panama

sailpsychology

0

0

4,521

0

Sailinguma

0

0

14,964

This J109 lost control of it's spinnaker while sailing in the 2025 Scottish Series. With the tack line up and the halyard a 1/4 off the A-Sail quickly turned into a Kite Surfing rig and tried to accelerate the boat down win. A simple sailing manoeuvre in big breeze can turn into a sailing fail in seconds if the whole crew is not on top of their game. The crew needs to be co-ordinated and all the lines need to run freely to ensure the spinnaker makes it be to the boat as planned While we were not watching to figure out what lead to this our guess is the skipper was not running deep enough when the started the drop. If you are running square and have the kite behind the main it helps create a wind shadow which makes it easier to control as your crew race to complete the drop. Thanks one of the travelling Bottom Up Boats crew for sending on this lively action from a gusty day from the 2025 Scottish Series.

bottomupboats

0

0

152,818