close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

شارٹس بنانا

No words. Just simple, step-by-step how-to content. This Tech Team Express Video shows you how to adjust the engage point on Harken Ratchamatic Blocks. To increase or decrease the load at which the ratchet engages, first, move the sheave so the hole in the sheave’s groove is at the bottom of the block. Insert a 2.5 mm Allen wrench and turn clockwise to engage at higher loads and counterclockwise for lighter loads. You will need to remove the becket before adjusting if it is a becket block.

harken

0

0

4,577

0

Alex

0

0

900

0

sailbrazil

0

0

535

Our most recent sailing vlog: https://youtu.be/a_DdFtjMJ3k Watch from the beginning: https://youtube.com/playlist?list=PLcWU2YqIfrwNzE0CWzKO4gzMdolS3Z0Ub

Expeditionevans

0

0

8,561,863

The deck coating is almost complete, the hard stuff is done. Let me know what you think. #sailboat #sailing #totalboat #sailboatrepair

sailing_el_jaleo

0

0

1,314

It's a slight different race today with the ORCV fleet offered to consider pledging to support the Good Friday Appeal with their first sked tonight. Volunteer Race Director Ray Shaw runs the fleet through the starting protocols including exclusion zones, shipping to be mindful of, communication channels be observed before doing a final check of crew and confirming they are a starter.

oceanracingclubofvictoriaorcv

0

0

130