tallshipspacific
tallshipspacific

tallshipspacific

(@tallshipspacific)

      |      

Người đăng ký

   Những video mới nhất

tallshipspacific
208 Lượt xem · 9 năm trước kia

Crossing the Mainyard aboard the Frigate Hermione.

tallshipspacific
72 Lượt xem · 9 năm trước kia

0

tallshipspacific
106 Lượt xem · 9 năm trước kia

A little description of the set up of the Jeers to the Capstan for hoisting the Mainyard.

tallshipspacific
108 Lượt xem · 9 năm trước kia

Stitching a popped seam on the lower topsail of the Gulden Leeuw on the way to Lisbon.

tallshipspacific
188 Lượt xem · 9 năm trước kia

Making over a steady 10 knots on the way to Lisbon. Just prior to taking in the topgallant.

tallshipspacific
406 Lượt xem · 9 năm trước kia

The three masted schooner Gulden Leeuw making seven to ten knots in the open Atlantic.

tallshipspacific
185 Lượt xem · 10 năm trước kia

Final Stages of crossing the Main Topgallant yard.

tallshipspacific
4,544 Lượt xem · 10 năm trước kia

0

tallshipspacific
170 Lượt xem · 10 năm trước kia

0

tallshipspacific
22 Lượt xem · 10 năm trước kia

0

tallshipspacific
68 Lượt xem · 11 năm trước kia

0

tallshipspacific
151 Lượt xem · 11 năm trước kia

0

tallshipspacific
245 Lượt xem · 11 năm trước kia

0

tallshipspacific
202 Lượt xem · 11 năm trước kia

Make the selvegee between two posts, belaying pins, nails in a board, etc.. hitch one end to a post, and start taking even taught turns, I took 16 turns for this one. On the last turn marling hitch all the way around, fairly close together, and make the two ends fast to one another. This makes an incredibly strong flexible strop that can be used for just about anything. Take care that the turns are as even as possible so that the load is distributed evenly along all the strands.

Cho xem nhiều hơn