En yeni videolar

tallshipspacific
208 Görünümler · 9 yıl önce

Crossing the Mainyard aboard the Frigate Hermione.

tallshipspacific
72 Görünümler · 9 yıl önce

0

tallshipspacific
106 Görünümler · 9 yıl önce

A little description of the set up of the Jeers to the Capstan for hoisting the Mainyard.

tallshipspacific
108 Görünümler · 9 yıl önce

Stitching a popped seam on the lower topsail of the Gulden Leeuw on the way to Lisbon.

tallshipspacific
188 Görünümler · 9 yıl önce

Making over a steady 10 knots on the way to Lisbon. Just prior to taking in the topgallant.

tallshipspacific
406 Görünümler · 9 yıl önce

The three masted schooner Gulden Leeuw making seven to ten knots in the open Atlantic.

tallshipspacific
185 Görünümler · 10 yıl önce

Final Stages of crossing the Main Topgallant yard.

tallshipspacific
4,544 Görünümler · 10 yıl önce

0

tallshipspacific
170 Görünümler · 10 yıl önce

0

tallshipspacific
22 Görünümler · 10 yıl önce

0

tallshipspacific
68 Görünümler · 11 yıl önce

0

tallshipspacific
245 Görünümler · 11 yıl önce

0

tallshipspacific
202 Görünümler · 11 yıl önce

Make the selvegee between two posts, belaying pins, nails in a board, etc.. hitch one end to a post, and start taking even taught turns, I took 16 turns for this one. On the last turn marling hitch all the way around, fairly close together, and make the two ends fast to one another. This makes an incredibly strong flexible strop that can be used for just about anything. Take care that the turns are as even as possible so that the load is distributed evenly along all the strands.

Daha fazla göster