Video terbaru

tallshipspacific
208 Tampilan · 9 bertahun-tahun yang lalu

Crossing the Mainyard aboard the Frigate Hermione.

tallshipspacific
72 Tampilan · 9 bertahun-tahun yang lalu

0

tallshipspacific
106 Tampilan · 9 bertahun-tahun yang lalu

A little description of the set up of the Jeers to the Capstan for hoisting the Mainyard.

tallshipspacific
108 Tampilan · 9 bertahun-tahun yang lalu

Stitching a popped seam on the lower topsail of the Gulden Leeuw on the way to Lisbon.

tallshipspacific
188 Tampilan · 9 bertahun-tahun yang lalu

Making over a steady 10 knots on the way to Lisbon. Just prior to taking in the topgallant.

tallshipspacific
406 Tampilan · 9 bertahun-tahun yang lalu

The three masted schooner Gulden Leeuw making seven to ten knots in the open Atlantic.

tallshipspacific
185 Tampilan · 10 bertahun-tahun yang lalu

Final Stages of crossing the Main Topgallant yard.

tallshipspacific
4,544 Tampilan · 10 bertahun-tahun yang lalu

0

tallshipspacific
170 Tampilan · 10 bertahun-tahun yang lalu

0

tallshipspacific
22 Tampilan · 10 bertahun-tahun yang lalu

0

tallshipspacific
68 Tampilan · 11 bertahun-tahun yang lalu

0

tallshipspacific
151 Tampilan · 11 bertahun-tahun yang lalu

0

tallshipspacific
245 Tampilan · 11 bertahun-tahun yang lalu

0

tallshipspacific
202 Tampilan · 11 bertahun-tahun yang lalu

Make the selvegee between two posts, belaying pins, nails in a board, etc.. hitch one end to a post, and start taking even taught turns, I took 16 turns for this one. On the last turn marling hitch all the way around, fairly close together, and make the two ends fast to one another. This makes an incredibly strong flexible strop that can be used for just about anything. Take care that the turns are as even as possible so that the load is distributed evenly along all the strands.

Menampilkan lebih banyak