0

0

0

0

118

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

Would you keep her ultra-decked out or simplify for pure sailing joy? Rate this watercraft from 1-5 stars and comment below! Bluegame BG62 © Bluegame Yachts Length: 61 ft 6 in (18.80 m) Beam: 17 ft 7 in (5.37 m) Draft: 4 ft 7 in (1.40 m) Engines: Twin Volvo Penta IPS 1200 or optional IPS 1350 (≈ 2×900-1000 hp) Top Speed: about 38-39 knots Cruising Speed: around 30-32 knots Fuel Capacity: approx. 2,800 litres Water Capacity: approx. 650 litres Cabins: 2 cabins standard, optional 3-cabin layout Heads: 2-3 toilets The BG62 blends bold Italian styling, sport-utility ambition, and real live-aboard comfort. With a walkaround deck, carbon fibre hardtop, open cockpit social zones, and a lowering stern platform for launching a tender or swimming, she delivers versatility. Below deck, high ceilings, large windows, and chic interiors make her feel far bigger. All without demanding a full crew: joystick-driven IPS and smart deck layout make her owner-friendly yet high performance. #BluegameBG62 #SportUtilityYacht #HighPerformanceMotorYacht #HarbourMasters

0

0

0

266

0

0

0

0

32,123

As Sunday becomes a routine break, a day of relaxation, and one week of accumulated tensions dissolve, what better way to rejoice in your body and mind than to succumb to the appeal of diving and exploring the #underwater world of the deep? So here we are now onboard La Galigo, refreshing our minds to go diving in #Komodo but still we must conduct our routine task for safety: doing a briefing before diving. This is to ensure that divers know the #underwater landscape of a dive site before exploring the rich #marinelife in #KomodoNationalPark. Care to join a dive trip with us? ✉️ info@LaGaligoLiveaboard.com 💬 +62 812 2000 2025 (WhatsApp) 🌐 www.LaGaligoLiveaboard.com 🌐 Trip.LaGaligoLiveaboard.com (Schedule & Rates) ~~~~ #scubadiving #scuba #diving #diver #liveaboard #divetrips

0

0

0

1,597