Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
Shorts skab
The 𝗡𝗶𝗺𝗯𝘂𝘀 𝗖𝗼𝗺𝗺𝘂𝘁𝗲𝗿 𝟭𝟭 moves with purpose—cutting through open water with the confidence to go further, and the refinement to enjoy every mile along the way. From the first throttle to the final approach, this is what effortless performance looks like. #NimbusBoats #Commuter11 #SeattleYachts #LifeOnTheWater #PacificNorthwestBoating
Anche quest'anno Mylius sarà presente al Salone Nautico di Genova con uno stand e due yacht, un 60' e un 80'. Per richiedere un appuntamento è necessario fare la richiesta online qui: http://www.mylius.it/mylius-partecipera-alla-60ma-edizione-del-salone-nautico/ Ci vediamo a Genova dall'1 al 6 ottobre!
The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.