close
Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
62 Visningar · 22/03/25
659 Visningar · 03/09/24
2,162 Visningar · 01/06/24
154 Visningar · 28/05/24
1,961 Visningar · 03/10/23
870 Visningar · 12/03/22
8,074 Visningar · 24/02/22
ASME DH-03X servo Arduino Nano
0
0
855 Visningar·
06/05/19
The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.
Visa mer
0 Kommentarer
sort Sortera efter
Facebook-kommentarer
62 Visningar · 22/03/25
659 Visningar · 03/09/24
2,162 Visningar · 01/06/24
154 Visningar · 28/05/24
1,961 Visningar · 03/10/23
870 Visningar · 12/03/22
8,074 Visningar · 24/02/22
