0

0

0

0

25,672

0

0

0

0

78

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

Friendship 28 https://www.scanboat.com/en/17395670

0

0

0

51

► Normally, there’s always a sketch, a 3D image or a photo lurking on the internet and/or social media of a world preview, however secret it may be... But in this case, apart from the announcement of this new model on the Cannes Yachting Festival website, there’s no sign of this mysterious powercat from Tesoro Yachts, which promises to be pretty sporty with its twin 400hp Mercury Verado V10 outboards, that will be well-built (vinylester resin infusion) and luxurious if the single-hulled examples offered by the Spanish builder since 2015 are anything to go by. ► TECHNICAL SPECIFICATIONS Builder: Tesoro Yachts Architect: Tesoro Yachts Overall length: 37’5” (11.4 m) Beam: 11’10” (3.6 m) Draft: 20” (0.5 m) Displacement: 16,500 lbs (7.5 t) Motors: 2 x 400 HP outboards ► Become a FREE SUBSCRIBER to Multihulls World's YouTube page now - https://www.youtube.com/c/MultihullsWorld ► Log on to our website to discover over 500 multihulls tests! Subscribe to our newsletter to take advantage of our promotions and boat show invitations! https://www.multihulls-world.com/ ► Follow us on Facebook! https://m.facebook.com/MultihullsWorldMag/?locale2=fr_FR ► Discover us on Instagram! https://www.instagram.com/multihulls_world/ ► Follow our multi news on X - https://twitter.com/multihullsworld?lang=fr ► Let’s talk about business on Linkedin https://www.linkedin.com/company/multicoques-mag-multihulls-world/ ► Like us on TikTok! https://www.tiktok.com/@multihullsworldmag @tesoroyachts #tesoroyachts #powercat #multihullsworld #multihull #multicoquesmag #cannesyachtingfestival #frenchriviera #norbertconchin

0

0

0

575

0

0

0

0

601