close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Korte broek Opprett

En film som visar hur Postnord hanterar paket i Sverige.

mattiaso

0

0

29,901

Follow our 470 Men, Mat Belcher & Will Ryan, around the course during racing at the Sailing World Cup in Weymouth & Portland. Video by Beau Outteridge / Australian Sailing Team

aussailingteam

0

0

1,063

0

Fyd_adventure3049

0

0

206

Have you ever wondered how we get the grain pattern on our bulkheads to match the doors? It’s easy really, our doors are cut out from the bulkheads. Our bulkheads are laminated in place, they are made of two, 15mm thick marine grade plywood panels bonded together, there is also 0.9-1.2mm thick Sapele mahogany veneer on each side. This is the wood you see once the bulkhead is finished and we like it to match the door, perfectly. Before the bulkhead can be fitted, if there is a doorway, it needs to be added. This poses a few problems. Because every boat is individually built, one boat differs from the next so each yacht uses wood from the same tree, and this keeps the colour and grain pattern consistent throughout, but cutting out a door from a bulkhead would cause the bulkhead to flex. Even at over 30mm (1 1/4 in) thick a little flex could cause a problem and make it difficult to close a door once it’s installed. For this reason, we cut out the door, add the laminated Sapele mahogany frame to the bulkhead and 6mm of solid Sapele mahogany around the door and then fit the door into the bulkhead and secure the two together. Only then do we fit the bulkhead into position on the yacht. Once the bulkhead is securely laminated in place, the doors are removed and labelled before varnishing. The doors and the bulkheads are varnished separately. The bulkheads remain unvarnished to allow the GRP laminate and glues that attach the bulkhead to the hull to bond fully with the wood. Once the bulkheads are laminated in place, then they can be varnished, by hand and brush to give a thick, hard-wearing finish. #wearesirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

siriusyachts

0

0

2,636

Bavaria 30 Cruiser https://www.scanboat.com/en/17390073 - Bavaria sailing boats: Trusted brand with a wide range of models for every sailing enthusiast - Bavaria sailing boats: Innovative design and advanced technology for optimal performance on the water - Bavaria sailing boats: Spacious interiors and well-designed layouts for comfortable cruising experiences Bavaria Yachtbau GmbH is a German company that designs and manufactures a wide range of Bavaria sailingboats and Bavaria motorboats. The company is based in Giebelstadt, Bavaria and was founded in 1978. It is one of the largest yacht manufacturers in the world, producing a wide range of boats from small day sailors to large luxury cruisers. Bavaria yachts are known for their high quality construction, innovative design and competitive prices.

scanboat24

0

0

242

motherloadsailing

0

0

752