Extra Coarse Cut Farcla Compound | Hull Polishing Black Boat | Oxidation Removal. Black Hulls Can Be Extremely Difficult To Remove Oxidation. If You Are Dealing With Oxidation. If It Has More Than A Year Worth of Oxidation In Most Cases I Like Wetsanding; However, Some Customers Don’t Want That Level of Service. Using A Coarse Paste Compound Can Be Effective In Mitigating The Oxidation As A First Step. On Black Boats, However, It Will Still Be Some Cloudiness And Not Give You A Mirror Finish. In That Case You Will Have To Do A Second Step. Polishing Will Bring Out The Color, Remove Swirls, And Eliminate Buffer Trail. Finally, You Add A Protective Coating. Products: Extra Coarse Farecla Paste Compound Wool Pad Makita Polisher Follow us on Instagram @themobileboatguys www.mobileboatguys.com ____________________________________ Subscribe To Our YouTube Channel Follow Us On: IG: https://www.instagram.com/tv/Ca6OoIYDZaH/?utm_medium=copy_link Facebook: https://www.facebook.com/142279219456118/posts/1659412184409473/?d=n

0

0

0

527

Full Video: https://www.youtube.com/watch?v=vmearvSsASY&ab_channel=SailingNala #shorts #cocktail #christmas Check our website !!! http://www.svnala.com/ Follow Us on Instagram : http://instagram.com/sailingnala/ Support Us on PayPal : https://www.paypal.me/sailingnala Support Us on Patreon : https://www.patreon.com/SailingNala

0

0

0

270

The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.

0

0

0

855

0

0

0

0

1,618

0

0

0

0

2,601

0

0

0

0

125