0

0

0

0

5,565

Virando por avante bajo el puente de Rande. Tacking below Rande´s bridge. Virar a vela #navegaravela. Siempre que nos aproximamos a un cabo o estrecho el viento va a arreciar y modificar su dirección. La navegación a vela en estas zonas siempre es un reto para el navegante. En esta ocasión nos ha tocado hacerlo con el viento en la nariz, on the nose, como dicen nuestros compañeros anglosajones. No queda nada más que tomar la estrategia acertada para poder pasar con los mínimos bordos posibles. Eso sí, te va a tocar virar. Por cierto, que si te perdiste la primera parte la puedes ver desde aquí 👉 Si te ha gustado el vídeo 𝐒𝐮𝐬𝐜𝐫í𝐛𝐞𝐭𝐞 𝐚𝐥 𝐜𝐚𝐧𝐚𝐥 👍 Así nos ayudas a generar más contenido para ti... los amantes de la navegación y del mar. Y si le das a la campanita 🔔 ya alucino... se nos caerán unas cuantas lagrimillas. También nos puedes seguir en otras plataformas: YouTube - https://www.youtube.com/channel/UCEj3jQf5L9r_LMk_oak6Tqw 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 - https://www.instagram.com/sailingtxemacapitan_oficial 𝐓𝐢𝐤 𝐓𝐨𝐤 - https://www.tiktok.com/@sailingtxemacapitan 𝐅𝐚𝐜𝐞𝐛𝐨𝐨𝐤 - https://facebook.com/SailingTxemacapitan Linkedin - https://www.linkedin.com/in/txema-iglesias/

0

0

0

1,477

0

0

0

0

146

Check out the link below for full instructions on how to tie the Highwayman's Hitch. https://youtu.be/USjyE1nTV9Q The Highwayman’s hitch is a quick-release draw hitch used for temporarily securing a load that will need to be released easily and cleanly. The hitch can be untied with a tug of the working end, even when under tension. The highwayman's hitch can be tied in the middle of a rope, and so the working end does not need to be passed around the anchor when tying or releasing. The knot is three bights that each successively lock the previous one: - The first one, in the middle of the rope, wraps around the pole, - The second one (called the toggle bight) is a bight of the standing part locking the first one so the pole is held tight, and - The third one (called the slip-tuck) is a bight of the working part (slack end) locking the second bight. The locking actions are achieved by reaching through each bight to pull the next one through. The knot has to be finished by pulling the standing part tight to ensure that it holds. Until the knot is tightened and properly dressed, the highwayman's hitch has little holding power. The highwayman's hitch is susceptible to capsizing when the pole is substantially larger than the rope diameter. The failure occurs because the second bight sees the force of the standing part, but is held in place by the working part, which has no tension. When capsizing, tension on the standing part pulls the second bight through the first bight. This drags the slip-tuck through, and will release the hitch if the third bight isn't long enough. The team at bottom up boats hope you enjoyed our latest video demonstration where we teach you how to tie the highwayman's hitch.

0

0

0

71,540

NEW VIDEO: https://youtu.be/6zTtBu8tIvk?si=i3A9l3U7T_UXZckF We're just getting started sailing this summer on Lewisville Lake. Join Us: http://sailingintonirvana.com

0

0

0

46

via YouTube Capture

0

0

0

1,617