Tu crois connaître le Cap d’Agde ? Attends de voir ça de nuit… La journée, c’est touristique. La nuit… c’est un autre monde. Bienvenue à la Marina du Cap d’Agde. La Marina du Cap d’Agde la nuit, c’est une ambiance unique entre calme, lumières et petits secrets… 🌙✨ Tu savais que cet endroit avait une double vie ? 👀 Abonne-toi pour découvrir les coulisses des lieux les plus inattendus de France 🇫🇷 #CapdAgde #MarinaByNight # Marinaducapdagde #portducapdagde #AmbianceNocturne #TourismeFrance #LieuxInsolites #TikTokVoyage #NuitMagique #SpotSecret #SudDeLaFrance #VoyageTikTok #foryou #pourtoi #videoviral

0

0

0

14

This channel is funded by viewers like you. Please help us keep this channel creating great content by becoming a patron http://www.patreon.com/sailingdoodles Donate Via Paypal to help http://www.paypal.me/sailingdoodles

0

0

0

85,779

- [ ] Visiting Antigua and Barbuda❓Then Punctuate ‼️ Your Holiday with us. Gadaboat is a beautiful 52 ft Oceanis Yacht …. Come along with us for an incredibly special private day of sailing and experience the freedom, exhilaration, relaxation, get involved or zone out. Tasty 😋 fresh food, Icy cold beverages such as Prosecco, wine, soon to be world famous rum punch, beer and bottled water. Dive overboard and snorkel, swim to the beach or just float on noodles In blue crystal waters with a refreshing beverage, enjoy the company of our engaging crew ……sail into the sunset 🌅 ….and so more!!…. Experience Gadaboating with us….. We ❤️ special occasions

0

0

0

962

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

696

Feed the fish by hand, have incredible adventures & feel right at home https://www.rocktheboat.co.nz/

0

0

0

1

0

0

0

0

94