0

0

0

0

61,923

0

0

0

0

10,559

Reaching in 15 knots requires a combination of skill, technique and the right sailing boat, such as the J109, a popular choice for yacht racing and sailing lifestyle enthusiasts. In this video, we'll be sailing on Strangford Lough, a beautiful location for sailing and yachting, and demonstrating how to reach in strong winds. The Bermudian sloop rig of the J109 makes it an ideal boat for racing and cruising, and its performance in IRC sailing events is well-known. Whether you're sailing a Nicholson 43 or a J109, the principles of reaching in 15 knots remain the same, and by following these techniques, you can improve your sailing skills and enjoy the thrill of sailing on the open water. From the spring series to regatta events, understanding how to reach in strong winds is essential for any sailor, and can make all the difference in yacht racing and sailboat performance. By watching this video, you'll learn the techniques and strategies used by experienced sailors to reach in 15 knots, and how to apply them to your own sailing, whether you're sailing on Strangford Lough or elsewhere. The team at bottom up boats hope you are enjoying these short clips from the 2026 racing season.

0

0

0

734

Check out the link below for full instructions on how to tie the Highwayman's Hitch. https://youtu.be/USjyE1nTV9Q The Highwayman’s hitch is a quick-release draw hitch used for temporarily securing a load that will need to be released easily and cleanly. The hitch can be untied with a tug of the working end, even when under tension. The highwayman's hitch can be tied in the middle of a rope, and so the working end does not need to be passed around the anchor when tying or releasing. The knot is three bights that each successively lock the previous one: - The first one, in the middle of the rope, wraps around the pole, - The second one (called the toggle bight) is a bight of the standing part locking the first one so the pole is held tight, and - The third one (called the slip-tuck) is a bight of the working part (slack end) locking the second bight. The locking actions are achieved by reaching through each bight to pull the next one through. The knot has to be finished by pulling the standing part tight to ensure that it holds. Until the knot is tightened and properly dressed, the highwayman's hitch has little holding power. The highwayman's hitch is susceptible to capsizing when the pole is substantially larger than the rope diameter. The failure occurs because the second bight sees the force of the standing part, but is held in place by the working part, which has no tension. When capsizing, tension on the standing part pulls the second bight through the first bight. This drags the slip-tuck through, and will release the hitch if the third bight isn't long enough. The team at bottom up boats hope you enjoyed our latest video demonstration where we teach you how to tie the highwayman's hitch.

0

0

0

71,540

0

0

0

0

63