close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Korte broek Opprett

0

diegodoveleiro2053

0

0

3

Sailing is a fun sport that welcomes participation from people of all backgrounds, ages and abilities. There are many different ways to get started in sailing through Discover Sailing and a range of opportunities for you to continue sailing at clubs as you develop your skills, experience and confidence.

australiansailing100

0

0

2,759

Random chicken in Philly.

oilfieldinvestor

0

0

43

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

followintrepidbear

0

0

696

sail-world

0

0

994

After 10 years in the sport, skydiving has completely changed my life. In this video, I share what it’s like to be a professional skydiver and tandem instructor with over a decade of experience jumping out of airplanes. We cover everything from high-speed freefly skydives to what makes tandem skydiving so rewarding. You’ll also get a behind-the-scenes look at daily dropzone life, including a fun (and very real) parachute packing race with my buddy Ben. Whether you're into skydiving, aviation, extreme sports, or just curious about what it's like to fall from 13,000 feet, there’s something here for you. 🎥 In This Video: – 10 years of skydiving experience – How skydiving changed my life – Tandem skydives and first-time jump reactions – Freefly and belly jumps with friends – Parachute packing race (can you pack faster?) – The joy of introducing new people to the sky – Flying, freefall, and everything in between Whether you're a licensed skydiver, student jumper, private pilot, aerobatics enthusiast, or just dream of flying, I hope this video inspires you to chase the sky. 📍 Filmed at: Skydive Midwest - https://skydivemidwest.com/ 🪂 Gear used: Vector V300 Micron - PD Valkyrie 71 - Kua Sky https://www.kuasky.com/ 📢 Don’t forget to like, comment, and subscribe for more skydiving videos, aviation adventures, and behind-the-scenes life as a skydiver and pilot. #Skydiving #TandemSkydive #Freefly #SkydiverLife #ParachutePacking #AviationVlog #ExtremeSports #PilotVlog #SkyAdventure #BaseJumping #Wingsuit #DropzoneLife #FlyingHigh #GeneralAviation #AdrenalineRush

theaustinlankford

0

0

949