Watch the sailboat gracefully maneuver through the bay, highlighting the thrill of yachting. The crew's skill is on full display as they navigate the waters and harness the power of sailing. Enjoy bottom up boats short clips from the 2025 racing season and witness the beauty of a boat in action.

0

0

0

6,398

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

46 meter Benetti - Asking Price : Euro 4.995.000 Mistress, a classic Benetti Shipyard 45 metre craft, reflects the owner’s profound love for traditional values, praticality and hospitality. The essential theme is confort and luxury, expressed through a generous use of space, perfectly matching the elegant boisseries and Versace furnitures. The result is a unique megayacht inimitable in its design and classic in its decor. With its sleek line and balanced proportions, evoking a world of harmonious beauty, her living spaces are delightfully warm and refined. Mistress is design for accomodating up to 9 guests in 5 cabins in the lower deck plus 2 in the master bedroom on the main deck, all with private bathroom and wardrobes. The finishings of the guest cabins are in contrasting colours in walnut. Mistress its design for fitting 10 crew on board. Designed for long distance cruising, “Mistress” was fitted on the flying bridge with Jacuzzi and a barbeque dining area. A gym and sauna room are located on the lower deck. All the equipments for scuba diving and snorkeling are also provided. Additionally, there are a large tender and two water bike on the upper deck. In sky lounge bar, you can find a huge flat screen TV equipped with karaoke system and media entertainments. All the bedrooms are fully equipped with TV’s and DVD players. TOYS N. 2 Jet Skys Sea Doo Sparc 2up Tender with Engine 115 cc Envinerude N. 2 Kayak N. 2 Kit for Scuba Diving Kit for Snorkeling DINING AREA Mistress is tought for corporate and family daily events. Counting all the dining areas you can serve up to 40 or more guests for dining on board. On the main deck there are 2 dining areas, one inside the living room that can seat up to 10 guests and outside of the main deck open area where there is a dining table that can fit up to 8 guests. On the upper deck open area there is a dining table that can accomodate 10 guests and on the sky lounge indoor dining with maximum 6 person capacity. The flying bridge barbecue dining area comes with a table which can be used for 8 guests both for aperitives and dinner. TECHNICAL DETAIL ENGINES MTU 2000x2 serie 396 N. 2 Caterpilar 125 kw Depurator Fuel Aman Black Water Fuel Tank 49 m3 Dirty Oil 1300 Lt Lube Oil 1300 Lt Water Tank 10 m3 Gray Water Tank Aft 1300 Lt Grey Water Tank Fwd 2400 Lt NAVIGATION SYSTEM Radar Furuno Radar Simrad N. 2 VHF DSC SEA 7157 Gyro Furuno Ais Furuno GPS Navigator Furuno Meteofax Cartographic Nobeltec Imarsat Miniemm Furuno SSB System Scanti Nerara Sat (Satellitar Phone) Antenna Sat Antenna Internet N. 2 Bow Winches N. 2 Stern Winches N. 2 Crane for Tender ENTERTAINMENT Gym Sauna Wi Fi Music System 8 Televisions Karaoke System Jacuzzi Mini Bars AREA LOWER DECK All the 5 guests cabins with their own bathrooms are located on the lower deck. There is a spacious crew area with 4 cabins that can contain 9 crew, utilities rooms such as the laundry and ironing room, and the engine room together with its control room. MAIN DECK Through the main deck you can access to gym area where there is also a sauna and a toilet.On the inside you can find a spacious living room, a dining area and the kitchen. The master bedroom is located on the front of the main deck with a wardrobe and 2 toilets for him and for her. UPPER DECK The sky lounge in the upper deck, provides guests with an ideal space for relaxation, table games, television and music. The captain room with the command area its located on the front of the upper deck. FLY BRIDGE You can access to the flying bridge from the upper deck and you will find a dining area and a jacuzzi.

0

0

0

320

Solar Power Needed for Starlink on a Sailboat #boat #sailing #shorts

0

0

0

839