The Most Customizable Space on the Sabre 51

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only

contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Corti Creare

There are many ways to configure this space, and we’re excited to offer this option next to the extended pantry aboard the new Sabre 51. It’s another example of how we’re refining every detail to make life on the water even more comfortable.

flat bar

Check out the link below for full instructions on how to tie the Highwayman's Hitch. https://youtu.be/USjyE1nTV9Q The Highwayman’s hitch is a quick-release draw hitch used for temporarily securing a load that will need to be released easily and cleanly. The hitch can be untied with a tug of the working end, even when under tension. The highwayman's hitch can be tied in the middle of a rope, and so the working end does not need to be passed around the anchor when tying or releasing. The knot is three bights that each successively lock the previous one: - The first one, in the middle of the rope, wraps around the pole, - The second one (called the toggle bight) is a bight of the standing part locking the first one so the pole is held tight, and - The third one (called the slip-tuck) is a bight of the working part (slack end) locking the second bight. The locking actions are achieved by reaching through each bight to pull the next one through. The knot has to be finished by pulling the standing part tight to ensure that it holds. Until the knot is tightened and properly dressed, the highwayman's hitch has little holding power. The highwayman's hitch is susceptible to capsizing when the pole is substantially larger than the rope diameter. The failure occurs because the second bight sees the force of the standing part, but is held in place by the working part, which has no tension. When capsizing, tension on the standing part pulls the second bight through the first bight. This drags the slip-tuck through, and will release the hitch if the third bight isn't long enough. The team at bottom up boats hope you enjoyed our latest video demonstration where we teach you how to tie the highwayman's hitch.

71,540

New Zealand is one of my favorite, if not my favorite, places to travel. Back in 2017 I spent five months there spearfishing and freediving throughout the entire country. Exploring not just on land, but under the sea as well was an amazing experience. The kelp forests were especially fun to dive through. Here you see me diving in the Coromandel Peninsula. After finding a cool rock formation, I knew I had to dive down and see what was underneath. Although there was no fish, it was still an amazing freedive and one that I'll never forget! . . More adventure content on: -Facebook: https://www.facebook.com/adventuremandan.life/ -Instagram: https://www.instagram.com/adventureman_dan/ -Website: https://www.adventuremandan.life . . . All music through Epidemic www.Epidemicsound.com