close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Kurze Hose Erstellen

0

gconboard

0

0

1,818

Tridata seyir elektroniği üzerinden gerçek rüzgar için yüksek ve alçak rüzgar alarmlarını nasıl ayarlıyoruz? Güvenli ve kontrollü seyir için rüzgar uyarılarını mutlaka kullanın. ⛵🌬️ Gerçek rüzgar değişimini kaçırmayın! Tridata üzerinden yüksek ve alçak rüzgar alarmı ayarları bu videoda. ⛵🌬️ Seyirde sürprizlere yer yok! Tridata ile gerçek rüzgar için yüksek & alçak rüzgar alarmlarını ayarlamayı gösteriyoruz. ⛵⚠️

captainssailing

0

0

62

Check out the link below for full instructions on how to tie the Highwayman's Hitch. https://youtu.be/USjyE1nTV9Q The Highwayman’s hitch is a quick-release draw hitch used for temporarily securing a load that will need to be released easily and cleanly. The hitch can be untied with a tug of the working end, even when under tension. The highwayman's hitch can be tied in the middle of a rope, and so the working end does not need to be passed around the anchor when tying or releasing. The knot is three bights that each successively lock the previous one: - The first one, in the middle of the rope, wraps around the pole, - The second one (called the toggle bight) is a bight of the standing part locking the first one so the pole is held tight, and - The third one (called the slip-tuck) is a bight of the working part (slack end) locking the second bight. The locking actions are achieved by reaching through each bight to pull the next one through. The knot has to be finished by pulling the standing part tight to ensure that it holds. Until the knot is tightened and properly dressed, the highwayman's hitch has little holding power. The highwayman's hitch is susceptible to capsizing when the pole is substantially larger than the rope diameter. The failure occurs because the second bight sees the force of the standing part, but is held in place by the working part, which has no tension. When capsizing, tension on the standing part pulls the second bight through the first bight. This drags the slip-tuck through, and will release the hitch if the third bight isn't long enough. The team at bottom up boats hope you enjoyed our latest video demonstration where we teach you how to tie the highwayman's hitch.

bottomupboats

0

0

71,540

0

solseekerlife

0

0

56

0

Dutchsailingfamily

0

0

291

Work with the World's BEST 👑 ILCA Coaches in one of the most renowned sailing ⛵️ venues in the world with over 6 days of coaching with daily video review 🎥 Don't wait to reserve your spot 👉 BOOK NOW & SAVE BIG! https://internationalsailingacademy.com/clinic-dates/ @internationalsailingacademy Our mission is simple. We want you to achieve results. Your learning is our success, and this course has been designed with this goal solely in mind. You'll begin to learn new concepts and techniques through the videos and resources presented online. Then you'll take our recommended actions combined with your new knowledge and skyrocket your dinghy performance to the next level. Virtual Coaching Sign Up Link: https://discord.gg/virtualcoaching Visit: https://internationalsailingacademy.com/ Laser Sailing Coaching: https://internationalsailingacademy.com/about/ ISA Online: http://learn.internationalsailingacademy.com Laser Sailing Clinics: https://internationalsailingacademy.com/clinic-dates/ #ilcasailor #ilcaclinic #ILCAsailing #ilcaclinics #lasersailingclinic #learntosail #sailing #sailingILCA #ilcaregatta #ilcatraining #Isa #internationalsailingacademy #mexicosailing #lasersailing #sailinglasers #lasersailingclinic #ilcasailingclinic International Sailing Academy

internationalsailingacademy

0

0

892