0

0

0

0

33

Made out of a bicicle pump! The idea is to use the one way valve that every bicicle pump has on its piston, to improve the performance of the gun, instead of using loose pistons as usually. I know the difference may not be crucial but it's for the sake of well-design. The piston is too heavy but seems to prove the theory. At only 75psi it shoots a 0,2g 6mm plastic bb through a steel (yes, steel. This is Europe) coke can. Filled with water it pierces the can and leaves a mark on the other wall. Air leak detected, soon to be fixed. UPDATE 20150719 Air leak was fixed with teflon tape. Cannon was intended to be tested to 10bar / 145psi. At 8bar / 116psi the back bursted off the main body, propelling it against a wall, with the cannon hitting at a great speed. Result is a bent cannon. Speed doesn't seem to have decreased but precision has been seriously affected. Plans for now are to test the energy at 75psi (like this teaser shows), then cut the cannon to the unbent part (which is about half the lenght), glue the back permanently and test energy again at 75psi to see the relationship between cannon lenglt and muzzle energy. Afterwards, with the back end fully glued, repeat tests at 116psi / 8bar and hopefully get the same energy as full-lenght-cannon @ 75psi. If not, test pressure until total burst, or the desired energy achieved. Advise is greatly appreciated. Thanks for watching! A FewFriendsFace production Likeyright FFF2015 All likes reserved

0

0

0

247

This channel is funded by viewers like you. Please help us keep this channel creating great content by becoming a patron Join this channel to get access to perks: https://www.youtube.com/channel/UCkDwexrF43p_1QurfKFBCBA/join http://www.patreon.com/sailingdoodles Donate Via Paypal to help http://www.paypal.me/sailingdoodles

0

0

0

29,452

got asked it enough we made a reel 🙄

0

0

0

611

This was my reaction to the first attempt at launching Freddie, after over a week of waiting past the day we were told we would be launched… We put our lives on hold to get her ready and to show up for this, not to mention getting our hopes way up that we would finally see her off land and back where she belongs, in the water… My heart was hurting and I felt frustrated… but tried to focus on positives. Watch and see what happens, then please subscribe and turn on notifications so you can follow along on our adventures with Freddie ⛵️ #liveaboard #sailboat #sailing #tanzer22 #miniretirement

0

0

0

332