close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Shorts Lumikha

Our most recent sailing vlog: https://youtu.be/a_DdFtjMJ3k Watch from the beginning: https://youtube.com/playlist?list=PLcWU2YqIfrwNzE0CWzKO4gzMdolS3Z0Ub

Expeditionevans

0

0

8,561,863

0

vagabondepicurean

0

0

507

Just a short clip of us giving head and stern to keep the vessel steady while facing rough weather. Nothing fancy, just doing our job and respecting the sea. Shared with humility for anyone curious about life at sea.

sailwithjay

0

0

3,209

Have you ever wondered how we get the grain pattern on our bulkheads to match the doors? Itโ€™s easy really, our doors are cut out from the bulkheads. Our bulkheads are laminated in place, they are made of two, 15mm thick marine grade plywood panels bonded together, there is also 0.9-1.2mm thick Sapele mahogany veneer on each side. This is the wood you see once the bulkhead is finished and we like it to match the door, perfectly. Before the bulkhead can be fitted, if there is a doorway, it needs to be added. This poses a few problems. Because every boat is individually built, one boat differs from the next so each yacht uses wood from the same tree, and this keeps the colour and grain pattern consistent throughout, but cutting out a door from a bulkhead would cause the bulkhead to flex. Even at over 30mm (1 1/4 in) thick a little flex could cause a problem and make it difficult to close a door once itโ€™s installed. For this reason, we cut out the door, add the laminated Sapele mahogany frame to the bulkhead and 6mm of solid Sapele mahogany around the door and then fit the door into the bulkhead and secure the two together. Only then do we fit the bulkhead into position on the yacht. Once the bulkhead is securely laminated in place, the doors are removed and labelled before varnishing. The doors and the bulkheads are varnished separately. The bulkheads remain unvarnished to allow the GRP laminate and glues that attach the bulkhead to the hull to bond fully with the wood. Once the bulkheads are laminated in place, then they can be varnished, by hand and brush to give a thick, hard-wearing finish. #wearesirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

siriusyachts

0

0

2,636

0

reneuen

0

0

549

In the middle of the open ocean, this little bird landed on our yacht out of nowhere. A surprising visit from the sky โ€” far from land! ๐Ÿ‘‰ Subscribe for more sailing adventures and unexpected moments at sea. #sailinglife #birdonboard #oceanwildlife #yachtlife #pacificocean

Captaingermanexploring

0

0

2,420