0

0

0

0

469

1. Remove the old caulking. We use a special tool from @teakdeckingsystems. 2. If your deck is both screwed and glued, considwe removing the screws. We chose to remove the screws since they only created a possibility for water to enter the construction. 3. Fill out every screw hole with epoxy. During the renovation, we learned it would be a good idea to fill the holes with epoxy as soon as you remove the screws to ensure you seal every single hole. 4. Route between all the teak strips. We routed all the way to the gel coat to have as much wood to work with as possible. We used a fine cutter where the caulking was across the grain. 5. Seam sanding. It helps remove the remaining caulking and gives the teak a fresh bonding surface. 6. Masking the teak strips. We chose to mask the wood to reduce the sanding process later on because we knew the teak wasn’t very thick. 7. Cleaning off with acetone. This helps remove dust and gives the caulking the best conditions to adhere to the wood and cure. 8. Start caulking. We used an air compressor caulking gun. It makes the process easier for large surfaces that need caulking - we used SIS 440 from @teakdeckingsystems. We also used a 3D-printed applicator for the caulk head, which minimizes the amount of caulking used. I could only find it on @hfindustrimarineaps website. 9. “Spoon” caulk further into the seams. We used a flexible putty knife to smoothing the caulking. 10. Pull off the masking. While removing the tape, we used scissors to cut just before the area where it hadn’t been caulked yet. 11. Remove the top of the caulking. We used a sharp stanley knife. We did this to minimize sanding, just as we did with masking. 12. Sanding with grit 80. We used the fine cutter’s sanding head for all the edges and an orbital sander for the larger areas. Side note: Sanding with grit 40. We believe the best way is to sand before routing to even out the wood. Unfortunately, we had many places where the wood was so worn out that it wouldn’t have been possible to follow the old tracks with the router after sanding. #diy #sailing #sailingdiy #teak #teakdeck #sailingdenmark #boatwork #shortoftheday

0

0

0

694

Sailing boat - Både sælges, CT-38 Warwick - design similar to Swan 38, 1979 EUR 30.000 Scanboat https://www.scanboat.com/en/boat-market/boats/sailing-boat-ct-38-warwick---design-similar-to-swan-38-17487568

0

0

0

1,752

🎉 It’s Almost Here! Next Saturday, join us for the Free Open House & Cruisers Party in Annapolis! 🛥️ Step aboard stunning catamarans 🌊 Test sail your dream boat 🍹 Enjoy good vibes, live music & BBQ lunch Here’s what’s on deck: ⚓ Boat as a Business Seminar ⚓ Spinnaker Workshop ⚓ Live Music and BBQ Lunch ⚓ Sail the Globe Chat + Q&A ⚓ Bali Catamaran Demo Sails Tour and test sail the latest models in the Bali lineup: Bali 4.8 | Bali 4.6 | Bali 4.2 | Bali Catsmart Learn more about the Lineup: Bali Catsmart https://catamaranguru.com/yacht-sales/new-yachts/bali-catamarans/bali-catsmart-sail-catamaran/ Bali 4.2 Catamaran https://catamaranguru.com/yacht-sales/new-yachts/bali-catamarans/bali-4-2-catamaran/ Bali 4.6 Catamaran https://catamaranguru.com/bali-4-6-catamaran/ Bali 4.8 Catamaran https://catamaranguru.com/bali-4-8-catamaran/ Whether you’re a serious buyer, a curious cruiser, or just love the boating lifestyle—this is the catamaran event of the season. Don’t miss it! 📍 Port Annapolis Marina 🗓️ Saturday, June 21 | 10AM–6PM 👉 RSVP now at LINK IN BIO @bali.catamarans #CatamaranGuru #AnnapolisOpenHouse #CruisersParty #SailingEvent #BaliCatamarans #FreeEvent #LiveaboardLife #TestSail #BoatLife #CatamaranCruisingYour Your safe harbor for yacht sales, yacht ownership, liveaboard lifestyle and sailing education, and charter management. Visit our website for insider details on how to own and operate a yacht for less than you think! Get expert yacht buyer assistance to ensure your buy the right boat for you and your dream.

0

0

0

1,183

A preview of what you can find just a short half-hour drive from downtown Split. This archaeological site is a must-see for history enthusiasts. Explore the well-preserved Stećak tombs and seven medieval wells any time of the year. Take a leisurely stroll and learn about the fascinating history of the area or join an Imotski tour with a local guide and see all the great sites along the way. Don't miss out on this unique opportunity to step back in time and explore the ancient wonders of Croatia. For more Imotski tour information contact: Filipa – info@soltravelcroatia.com See the main video on CROMADS channel here: https://youtu.be/ZblVzh7eC4Q

0

0

0

987

0

0

0

0

45