A meaningful opening to A Decade at Sea. Yacht Sourcing began the evening with an intimate gathering aboard a phinisi, bringing together partners, clients, and friends who have been part of the journey over the years. A space to reconnect, exchange stories, and reflect on how far we’ve come. The evening was elevated with a curated whisky tasting experience by @thievescollection adding another layer to the conversations shared on board. More than just a prelude to the gala dinner, this opening set the tone, built on relationships, trust, and a shared vision for the future of yachting in Indonesia. With appreciation to our sponsors @beprotectedindonesia and @cleopatra.thebrand for being part of this milestone.

0

0

0

90

0

0

0

0

1,335

Quý vị có nhu cầu thuê du thuyền để trải nghiệm hay cần tư vấn chọn mua du thuyền, vui lòng liên hệ: Hoàng Đức - Giám đốc Truyền thông Vietyacht ▶ Hotline: 0976 377 337 (SMS, Zalo, Viber) ▶ Email: hoangduc@vietyacht.vn ▶ Website: https://vietyacht.vn/ | https://luxyacht.vn/ ▶ Mời quý vị yêu thích du thuyền cùng tham gia group Yachts Passion: https://www.facebook.com/groups/229867694881650/ #duthuyen #review

0

0

0

2,046

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

See the whole adventure here: https://youtu.be/sj-CKo-VIPY Boats.co.uk sell boats from £5,000 to £20 million so whatever you need, we are here to find the right boat for you! Boats.co.uk was founded in 1969 and is the No.1 company in the UK in boat sales and full service operation. Suppliers of Fairline, Williams, Kawasaki, Sea Ray & Parker. Check out our current inventory here: https://www.boats.co.uk/searches/ Keep up to date, sign up to our newsletter: https://confirmsubscription.com/h/i/76A23A4CEADA3A5E

0

0

0

391,231