Our dedicated crew ensures that you will live an unequaled experience of Indonesia’s humans and seas, hence making your journey so memorable. Nothing is left to chance: we build our own yachts, we operate them and constantly improve our exclusive private cruises itineraries and services on board. Sail in style and experience a private cruises journey through what Indonesia archipelago has best to offer. Spoil your eyes with the stunning Indonesian landscapes and magical underwater world, from exuberant coral reefs to magnificent manta rays. Keep up with us on Website: https://pacifichighcruise.com/ Facebook: https://www.facebook.com/PacificHighIndonesia/ https://www.instagram.com/pacifichigh_indonesia/

0

0

0

304

What we are building in the shop for December 14, 2009. This morniing I'll build a map box for the Montessori school. I'll then go to the school and add some shelf stiffeners to some older bookcase and move some of those bookcases to a new location. After lunch I should be full speed on on the baseball loft bed with a murphy bed on the bottom.

0

0

0

9

0

0

0

0

660

Welcome to Sailboat Stuff! ⛵️ Thank you for taking time to watch this video 😃. Hope you will👍like, share and subscribe. ☆Channel support option☆ patreon.com/sailboatstuff https://www.buymeacoffee.com/sailboatstuff https://www.amazon.com/hz/wishlist/ls/2IHZA9ILQSRGR?ref_=wl_share ☆Contact me☆ sailboatstuff1@gmail.com

0

0

0

388

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145