MOV039 Raw video. Yet to be edited.

0

0

0

10

BCN Port Innovation Foundation, together with America's Cup Event Barcelona, has presented at L'Aquàrium de Barcelona the BCN Sotamar project, an initiative with a holistic approach to protect marine ecosystems. This project addresses habitat degradation, biodiversity loss and the effects of climate change, integrating actions to generate a positive impact. BCN Sotamar is a sustainable and ongoing project that is part of the legacy projects of the Louis Vuitton 37th America's Cup, which, together with World Sailing, has named it the event's flagship sustainability project. Today's action marked just the beginning of an ambitious, long-term strategic plan that will be implemented making a significant contribution to the development of the blue economy and the well-being of our coastal communities. FIND OUT MORE at: https://www.americascup.com SUBSCRIBE to the official America's Cup channel: https://www.youtube.com/c/americascup Like America’s Cup On Facebook: https://www.facebook.com/americascup Follow America’s Cup On Twitter: https://www.twitter.com/americascup Follow America’s Cup On Instagram: https://www.instagram.com/americascup Stay up to date with the America’s Cup newsletter: https://www.americascup.com/en/newsletter The 37th America's Cup will be Defended in Barcelona by four-time America's Cup winner, the Royal New Zealand Yacht Squadron represented by their team, Emirates Team New Zealand. #AmericasCup #AC37 #Barcelona2024

0

0

0

2,426

0

0

0

0

1,557

+ To receive my FREE GIFT to you, CLICK HERE: https://bit.ly/3uSmHhI The e-book "19 Fatal Mistakes to Avoid When Buying Your Dream Catamaran + Subscribe to our YouTube Channel at https://bit.ly/3ta7Hv6 + See the full tour and review: https://youtu.be/ckOMgFXJdlo

0

0

0

118

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

698

✅ I termini che DEVI conoscere prima di mettere piede su una barca! ⛵️ Niente doppi sensi: “poppa piena” parla solo di vento 😉 Bolina, traverso, lasco, poppa piena… sono andature fondamentali per capire come si muove davvero una barca! E poi virata e abbattuta: le due manovre base per cambiare direzione senza combinare guai ⚓️ Vuoi saperne altri? Commenta “OK” e te li spiego nel prossimo video! #nautica #barche #sailing #yacht #termininautici

0

0

0

260