Spot dell e nostre vacanze in barca a vela con due attori d'eccezione, Charlie & Nascar!

0

0

0

150

0

0

0

0

2,127

0

0

0

0

446

Pasar por debajo de un puente a vela siempre es algo emocionante. También lo es en nuestro querido Gran Nergha, un Jeanneau Sun Odissey 51.9. El puente de Rande es un icono en la Ría de Vigo. Pasar por debajo implica dificultad, sobre todo si en el día que has elegido sopla viento fuerte. Está situado en el estrecho de Rande y esto hace que el viento se encañone, aumentando su intensidad y rolando en la periferia. A mí me gusta la acción. Si te ha gustado el vídeo 𝐒𝐮𝐬𝐜𝐫í𝐛𝐞𝐭𝐞 𝐚𝐥 𝐜𝐚𝐧𝐚𝐥 👍 Así nos ayudas a generar más contenido para ti... los amantes de la navegación y del mar. Y si le das a la campanita 🔔 ya alucino... se nos caerán unas cuantas lagrimillas. También nos puedes seguir en otras plataformas: YouTube - https://www.youtube.com/channel/UCEj3jQf5L9r_LMk_oak6Tqw 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 - https://www.instagram.com/sailingtxemacapitan_oficial 𝐓𝐢𝐤 𝐓𝐨𝐤 - https://www.tiktok.com/@sailingtxemacapitan 𝐅𝐚𝐜𝐞𝐛𝐨𝐨𝐤 - https://facebook.com/SailingTxemacapitan Linkedin - https://www.linkedin.com/in/txema-iglesias/

0

0

0

594

A fairlead is the fitting that controls the angle at which the jib sheet pulls on the sail. On many sailboats, the fairlead or jib-sheet car slides forward and aft along a track. Moving it changes how much sheet tension is applied to the foot of the jib versus the leech, which changes the sail’s shape and twist. When you move the fairlead forward, the sheet pulls more downward on the sail. This increases tension on the leech, keeping the upper part of the jib more closed, while allowing the foot to become fuller. In simple terms: fairlead forward = less twist in the top of the jib. When you move the fairlead aft, the sheet pulls more horizontally. This increases tension along the foot but reduces tension on the leech. The upper part of the sail is then able to twist outward and spill wind. In simple terms: fairlead aft = more twist in the top of the jib. The telltales are the real test. Ideally, the telltales from the bottom to the top of the jib should behave similarly. If the upper telltales break first, the top of the sail often needs more power and less twist, so move the fairlead forward. If the lower telltales break first, move the fairlead aft, allowing more twist in the upper sail. There is also a useful heavy-air application. Moving the fairlead aft opens the upper leech and allows the top of the jib to twist away from the wind. That spills some of the wind from the upper sail, reducing power and therefore reducing heeling. So the easiest way to remember it is: Fairlead forward → tighter leech → less twist → more power up high. Fairlead aft → looser leech → more twist → spills power up high.  #sailingschool #sailing

0

0

0

261