0

0

0

0

2,960

🚁💨 Skyfall to Speed A drone dives from the clouds straight toward a racing catamaran — Sun blazing, water flying, hull slicing the sea. Fast. Fluid. Fierce. 🌊☀️ #CatamaranRush #DroneDive #Cinemati

0

0

0

145

0

0

0

0

12

pour la sortie de leau ... ont fais le voyage avec le RED CASTLE ... question de tester les performances !!! c evident que je suis pas de taille !!! Momigi fais 5.8 noeud a fond la caisse !!! lui roule au minimum que son moteur peu donner !!!

0

0

0

4

► Votre magazine préféré daté décembre/janvier est en ligne - avec son contenu enrichi bien sûr ! Plus que jamais, place à l'interactivité : les icones bleues qui remplacent les QRcodes de la version papier vous conduisent désormais vers nos vidéos et nos essais ! Dans ce numéro, vous découvrirez notre incontournable Guide d'Achat et ses 150 multicoques de 20 à 70 pieds. A l'essai, l'Exess 11, le Lagoon 43, le Leopard 46 et le Rapido 53XS. Bonne lecture et bon visionnage ! ► Abonnez-vous GRATUITEMENT à la chaîne YouTube de Multicoques Mag dès maintenant – https://www.youtube.com/c/MultihullsWorld ► Connectez-vous à notre site Web pour découvrir plus de 600 essais ! Abonnez-vous à notre newsletter afin de profiter de nos promotions et d’invitations aux salons nautiques ! https://www.multicoques-mag.com/ ► Suivez-nous sur Facebook ! https://www.facebook.com/MulticoquesMag/ ► Découvrez-nous sur Instagram https://www.instagram.com/multihulls_world/ ► Suivez les actus multi sur X https://twitter.com/multihullsworld?lang=fr ► Parlons business ! https://www.linkedin.com/company/multicoques-mag-multihulls-world/ ► Likez-nous sur TikTok ! https://www.tiktok.com/@multihullsworldmag #multicoquesmag #navigation #croisiere #multicoque #essaienmer #testenmer #navigation #voile #croisiere #grandecroisiere #grandvoyage #magazine #catamaran #youtube #tiktok #trimaran #multipower #powercat #forevergreen #electricboat @LagoonCatamarans1984 #lagoon43 @EXCESSCatamarans #excess11 @LeopardCatamaran #leopard46 #rapido53xs @rapidotrimarans

0

0

0

155

1. Remove the old caulking. We use a special tool from @teakdeckingsystems. 2. If your deck is both screwed and glued, considwe removing the screws. We chose to remove the screws since they only created a possibility for water to enter the construction. 3. Fill out every screw hole with epoxy. During the renovation, we learned it would be a good idea to fill the holes with epoxy as soon as you remove the screws to ensure you seal every single hole. 4. Route between all the teak strips. We routed all the way to the gel coat to have as much wood to work with as possible. We used a fine cutter where the caulking was across the grain. 5. Seam sanding. It helps remove the remaining caulking and gives the teak a fresh bonding surface. 6. Masking the teak strips. We chose to mask the wood to reduce the sanding process later on because we knew the teak wasn’t very thick. 7. Cleaning off with acetone. This helps remove dust and gives the caulking the best conditions to adhere to the wood and cure. 8. Start caulking. We used an air compressor caulking gun. It makes the process easier for large surfaces that need caulking - we used SIS 440 from @teakdeckingsystems. We also used a 3D-printed applicator for the caulk head, which minimizes the amount of caulking used. I could only find it on @hfindustrimarineaps website. 9. “Spoon” caulk further into the seams. We used a flexible putty knife to smoothing the caulking. 10. Pull off the masking. While removing the tape, we used scissors to cut just before the area where it hadn’t been caulked yet. 11. Remove the top of the caulking. We used a sharp stanley knife. We did this to minimize sanding, just as we did with masking. 12. Sanding with grit 80. We used the fine cutter’s sanding head for all the edges and an orbital sander for the larger areas. Side note: Sanding with grit 40. We believe the best way is to sand before routing to even out the wood. Unfortunately, we had many places where the wood was so worn out that it wouldn’t have been possible to follow the old tracks with the router after sanding. #diy #sailing #sailingdiy #teak #teakdeck #sailingdenmark #boatwork #shortoftheday

0

0

0

694