Con un diseño y acabados de calidad hacen de Freebird Catamarans la mejor excursión en barco que puedas reservar en Tenerife. Experimentará la calidad y el servicio de Freebird Catamarans desde el momento en que lo recogen en su hotel, hasta el final de la excursión. Todos nuestros catamaranes cuentan con una Zona VIP con cómodas hamacas para tomar el sol y relajarte en un día en el que podrás desconectar y olvidarte del estrés diario. https://www.freebirdone.com/es/

0

0

0

145

The Maxi 95 was designed to accommodate a family safely and comfortably and also to sail well, the design realised all three goals. Production started in 1972 and continued into the 1980s with incremental improvements occurring each year. Manufacturing was based on the west coast of Sweden and around Lake Vnern which lies 100 km north east from the city of Gothenburg (additional descriptions can be found in our translation of the original Owners Manual). As fibreglass was a new material for boat construction, the moldings were made much thicker (and stronger) than todays productions. Osmosis is rather unknown to most yachts from that era when extra catalyst was added for extra strength. This means that the 20 year old Maxi boats are still structurally strong and ready to continue. Engines and other accessories may wear out and need replacement but the hulls continue to serve well.

0

0

0

6,248

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

0

0

0

0

69

Reminiscing on a great sail a few weeks back. Sailing to the Newport Beach Boat Show.

0

0

0

1,754

The Nimbus 365 Coupé brings Scandinavian design and long-distance cruising capability together in a thoughtfully designed 37' package. With two cabins, accommodations for up to six, an 11'5" beam, and 185 gallons of fuel capacity, she’s built for comfortable weekends and extended time on the water. .....𝗮𝗻𝗱 𝘀𝗵𝗲’𝘀 𝗮𝗿𝗿𝗶𝘃𝗶𝗻𝗴 𝗹𝗮𝘁𝗲𝗿 𝘁𝗵𝗶𝘀 𝘆𝗲𝗮𝗿. #NimbusBoats #Nimbus365Coupe #SeattleYachtsWashington #ScandinavianDesign #CruisingYacht #Yachting

0

0

0

5