Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
ショーツ 作成
Si naviga nelle ioniche della Grecia con un nuovo equipaggio
0
0
0
236
On our sailing trip in the Aeolian Islands in Sicily, we shot this flying a gennaker from Filicudi to Lipari. The island forward to port with two volcanic peaks is Salina. The boat is a Jeanneau 519. Visit our blog on this trip at http://www.nauticed.org/sailing-blog/sailing-in-sicily-day-1-and-2/
0
0
0
529
The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.
0
0
0
856
Cruise along the coast of Malaga listening to live music onboard large sailing catamarans
0
0
0
146
0
0
0
0
1,782
0
0
0
11
