0

0

0

0

15

0

0

0

0

530

McConaghy Components: Carbon Fiber Retractable Dive LadderStrong, light and easily deployed and stowed. Email us for custom solutions: https://www.mcconaghyboats.com/contact Or enquiries@mcconaghyboats.com # clean deck solution # marine furniture # carbon fiber ladder # McConaghy Components # dive ladder

0

0

0

1,618

Lagoon 52 for sale. Pre.owned. 4 cabins, 4 heads. Many extras inside. For further information visit our website or contact us: info@catamaransbcn.com.

0

0

0

1,564

Watch our latest ep! https://youtu.be/a_DdFtjMJ3k REUPLOAD! This is what we eat in a day when we are out of fresh food and on an island that doesn't have any grocery stores :) Safety Warning: Sun Exposure, Walking Barefoot, Climbing Coconut Trees, Using Machetes, Going Freediving and Eating Freshly Caught Fish can all pose a risk to safety and should not be attempted without 'professional adult supervision' Stay safe out there kids ;)

0

0

0

2,364,779

Made out of a bicicle pump! The idea is to use the one way valve that every bicicle pump has on its piston, to improve the performance of the gun, instead of using loose pistons as usually. I know the difference may not be crucial but it's for the sake of well-design. The piston is too heavy but seems to prove the theory. At only 75psi it shoots a 0,2g 6mm plastic bb through a steel (yes, steel. This is Europe) coke can. Filled with water it pierces the can and leaves a mark on the other wall. Air leak detected, soon to be fixed. UPDATE 20150719 Air leak was fixed with teflon tape. Cannon was intended to be tested to 10bar / 145psi. At 8bar / 116psi the back bursted off the main body, propelling it against a wall, with the cannon hitting at a great speed. Result is a bent cannon. Speed doesn't seem to have decreased but precision has been seriously affected. Plans for now are to test the energy at 75psi (like this teaser shows), then cut the cannon to the unbent part (which is about half the lenght), glue the back permanently and test energy again at 75psi to see the relationship between cannon lenglt and muzzle energy. Afterwards, with the back end fully glued, repeat tests at 116psi / 8bar and hopefully get the same energy as full-lenght-cannon @ 75psi. If not, test pressure until total burst, or the desired energy achieved. Advise is greatly appreciated. Thanks for watching! A FewFriendsFace production Likeyright FFF2015 All likes reserved

0

0

0

247