Taken with a DJI Mini3 Pro showing the approach to the harbour and visitor pontoons for sailing and motor boats.

0

0

0

480

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

0

0

0

0

31

Autovettura Porsche mod. 911S TARGA cilindrata: 2340 cc potenza: 165 kW anno: 1970 alimentazione: benzina Scopri di più su gobid.it

0

0

0

892

Baglietto Info & Contact: https://bit.ly/nautistyles MUST WATCH NEXT: Enterprise https://youtu.be/BsFvBOJem2o & https://youtu.be/CjW_jiJ3YUc Follow Us Building an Explorer Yacht @NautiGuys https://bit.ly/3yPe1Z5 This might just be my personal fav Baglietto Tour to date! The exterior lines of the T52 Model are just stunning and it's packing some of the best features. The interior design is calm, warm, and welcoming. But if you know me well, you know that I like... dishwashers! lol, And there are 4 of them, 4 of the quick cycle ones onboard this Beautiful lady! Jokes aside, you absolutely MUST see the unique retractable forward staircase, retractable pool, insane sundeck, and the mind-blowing HELM from the Future! So grab your drink of choice, buckle up, and let's go for a wild ride! Enjoy the Tour! 😜 Let me know what you guys think of this one in the comments #SuperyachtTour #Baglietto #YachTour

0

0

0

58,661

0

0

0

0

108