Today we walk through of Catamaran Cruiser's 8x31 Lil Hobo trailerable houseboat. Ben talks about construction features, motor sizes, generator and other options. Catamaran Cruisers has been building boats for over 40 years — and the Lil’ Hobo is the perfect blend of RV living and houseboat adventure. Website: catamarancruiser.com Email: sales@catamarancruiser.com Phone: 800.365.1255 #houseboatlife #boatlife #floatinghomes #liveaboard #boatingadvice #luxuryhouseboat #offgridliving #waterfronthomes #tinyhome #rvliving #boatingadvice #outdoors #travel #trailer #trailers #rvlife

0

0

0

18

🏝 Follow for more travel hacks! https://www.youtube.com/lyfeuntethered?sub_confirmation=1 🍎 Airtags: https://amzn.to/3mCn4Js Never lose your luggage again! You can track it with an AirTag, and it will even help you find it in baggage claim! Tracking My Luggage With an AirTag! ✈️ #shorts #travel #airtag https://youtube.com/shorts/0HuHkZqHGgk

0

0

0

20,528

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

698

The Fort Walk is a very popular walk not only for the history of the remnants of the forts and beautiful views but for the chance of seeing a koala in the wild.The island boasts of around 800 koalas living on the island.

0

0

0

45

A ilha do montão de trigo se encontra no litoral de SP. Um lugar paradisíaco com águas cristalinas. Se tiver sorte poderá nadar com planctons a noite.

0

0

0

21

El Llaut "LAURA" es uno de los originales Menorquin Yachts. Tiene un fly bridge muy cómodo - el único con solariums para tumbarse con vistas de 360°.

0

0

0

165