close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

מִכְנָסַיִים קְצָרִים לִיצוֹר

Beneath the waves… a world awaits. With Ocean Breeze, explore the secrets of the deep — where silence speaks and wonders live. Are you ready to dive in? #OceanBreeze #Liveaboards #saudiarabia #redsea #naturelovers #diving #cruising #yacht #marinelife #scubadiving #underwater #sealife #buceo#visitsaudiarabia #tauchen #taucher #tauchreisen #divetrip #divetravel #divesafari #viaje #tauchsafari #SaudiArabien #plongeesousmarine #plongee #rotesmeer #hammerhead #bluehole #turtle

oceanbreezeliveaboards8624

0

0

43

www.nauticabellandi.it Anche sulla nuova Flyer GT 34, Beneteau è stata attenta ai dettagli per la siurezza dei proprio clienti, posizionando la bitta fuori bordo della barca per evitare ad esempio di urtarci con i piedi. Questo bi-motore con la doppia scelta di una motorizzazione Volvo 2x200cv Diesel o 2x300cv Benzina per una velocità superiore ai 30 nodi, può essere manovrato in tutta semplicità grazie allo Stern Drive e al Joystick proposto in opzione. Lasciatevi sorprendere dai suoi volumi interni! Beneficia di 2 cuccette indipendenti oltre a tutti gli equipaggiamenti necessari per le prime crociere in famiglia o con amici.

barchebellandi

0

0

1,311

0

juanmoreride1059

0

0

272

Turnip, Rock and Train… thought this was cool @SailingGlacierGem

sailingglaciergem

0

0

514

The wooden frame to lift the engine with must be very stable. Test with your own body that it's completly stable in all directions. Used double lifting devices to make the engine to move sidewards. Used plywood and soft material to protect the opening of the entrance to the boat. Shifted to a support over the entrance to the boat to get the engine into the thunnel. It was surpricing easy to get the engine in the right position. Checked with feeler gaugh that it was perfect aligned with the straight axis. The engine supports are flat and the the adjustment plates are under the supports. Those had not been changed when the engine was lifted out of the boat. As the alignment was absolutely perfect, I do not expect to even have to check when the boat comes into water.

syteres

0

0

1,217

Velejada

veleirosirius4206

0

0

54