Shot with 8mm App

0

0

0

30

Contest 85CS: The sense in adventure Commissioned specifically to continue a previously interrupted world circumnavigation, the recently delivered Polina Star IV from Contest Yachts reflects the extensive ocean experience of both owner and skipper.

0

0

0

2,774

Boat building of a version of Thunderhead 49 foot with Mexican wood. You can find Subscribe button in the description below! Acerca Este proyecto consiste en construir una versión del velero de 49 pies Rhodes Abeking & Rasmussen Cutter Thunderhead en la selva del Caribe mexicano. Es un proyecto único: • El único canal de construcción de veleros en México • Construido con excelente madera obtenida responsablemente en sitio • Un famoso y muy rápido velero de mar abierto • En algún lugar de la selva caribeña mexicana Nos basaremos en tecnologías y métodos basados en el libro “Como construir un bote de madera” de Bud McIntosh e influenciados por otros constructores de barcos. Queremos inspirar a tanta gente como sea posible a lo largo de nuestra aventura. Acompáñanos y déjanos contagiarte con nuestra energía, empatía, conocimientos y dedicación para hacer este proyecto una realidad. Si deseas colaborar o integrarte de alguna manera con este proyecto, por favor envíanos un correo electrónico a jungleranch@hotmail.com. ¡Por favor apóyanos con un Like y Suscríbete! Por ahora somos el único canal mexicano de YouTube dedicado a la construcción de un velero. Los gastos son muy elevados, si lo deseas, apóyanos donando 50-100 MXN o 5-10 US$ al número de cuenta: Interbancario: 014694606317123599 (Mexico) Paypal: jungleranch@outlook.com (Interntionl) Facebook: https://www.facebook.com/profile.php?id=61565906427383 Instagram: https://www.instagram.com/Junglernch70/

0

0

0

546

0

0

0

0

82

🌊⚡ Explore the future of clean energy in our latest Short! Dive into the world of innovative hydroelectric power systems. See how water is transformed into a powerful, eco-friendly energy source. Perfect for tech enthusiasts and green energy advocates!

0

0

0

996

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

696