Promotional video for UQReview. http://facebook.com/uqreview http://twitter.com/uqreview https://plus.google.com/+Uqreview/posts

0

0

0

198

Pasar una vacaciones en la Costa Brava es una de las mejores opciones para disfrutar de las playas de la Costa Brava de sus calas, rincones, pueblos marineros con encanto y sobre todo de su gastronomía. El alquiler de barcos en la Costa Brava y sobre todo si es un yate a motor, es uno de los mayores placeres que nos permite desplazamientos rápidos y disfrutar de la máxima comodidad sin envidiar la estancia en los mejores hoteles. En este vídeo te ofrecemos una vista rápida de como podrían ser tus próximas vacaciones en el mar rodeado de tu familia o amigos. ¿Porqué escoger unas vacaciones en la Costa Brava? Muy sencillo tiene buenas comunicaciones con el aeropuerto de Barcelona o Girona, casi todos los pueblos disponen de puertos modernos con todos los servicios y se puede fondear en infinidad de calas bien protegidas de los vientos. Se pueden practicar deportes náuticos de todas las especialidades y disfrutar de los fondos marinos de los Parques Naturales. Si te gusta la vida marina con todas sus comodidades no dudes en ponerte en contacto con Topsailingcharter en: Tel: +34 972 75 92 90 Whatsapp: +34 638 89 30 72 Mail: info@topsailingcharter.com Ver disponibilidad o pedir presupuesto en: https://www.topsailingcharter.com/alquiler-yate-costa-brava-alquiler-pangea/108-2670n4.html

0

0

0

256

Zum Lernen, eine Idee ist die Funktion Zufallswiedergabe der Playlists zu nutzen. For learning, a good idea is to use the random functionality of the play lists. Per l'apprendimento, una buona idea è utilizzare la funzionalità casuale delle playlist.

0

0

0

346

A finger of fog pouring over rush hour on the return leg of a family outing to Mt. Tam.

0

0

0

32

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

708