close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

ショーツ 作成

Haulout of Rua Hatu at Deltaville Boatyard in Virginia on February 14, 2025.

svruahatu

0

0

39

22 days until we sail off from America

Sailingcatalpa

0

0

5,746

Have you ever wondered how we get the grain pattern on our bulkheads to match the doors? It’s easy really, our doors are cut out from the bulkheads. Our bulkheads are laminated in place, they are made of two, 15mm thick marine grade plywood panels bonded together, there is also 0.9-1.2mm thick Sapele mahogany veneer on each side. This is the wood you see once the bulkhead is finished and we like it to match the door, perfectly. Before the bulkhead can be fitted, if there is a doorway, it needs to be added. This poses a few problems. Because every boat is individually built, one boat differs from the next so each yacht uses wood from the same tree, and this keeps the colour and grain pattern consistent throughout, but cutting out a door from a bulkhead would cause the bulkhead to flex. Even at over 30mm (1 1/4 in) thick a little flex could cause a problem and make it difficult to close a door once it’s installed. For this reason, we cut out the door, add the laminated Sapele mahogany frame to the bulkhead and 6mm of solid Sapele mahogany around the door and then fit the door into the bulkhead and secure the two together. Only then do we fit the bulkhead into position on the yacht. Once the bulkhead is securely laminated in place, the doors are removed and labelled before varnishing. The doors and the bulkheads are varnished separately. The bulkheads remain unvarnished to allow the GRP laminate and glues that attach the bulkhead to the hull to bond fully with the wood. Once the bulkheads are laminated in place, then they can be varnished, by hand and brush to give a thick, hard-wearing finish. #wearesirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

siriusyachts

0

0

2,636

Many people say that full battened sails are awkward to raise and lower, especially downwind. However if the proper gear is used lowering a mainsail can be fast even downwind. Video taken while sailing to the Bahamas on board a Transit 38 catamaran by Woods Designs. You can build this live aboard cruising boat from bare hulls We also have a large range of other multihulls, both power and sail from 14ft -45ft that you can build yourself from plans. Check out www.sailingcatamarans.com for more details

woodsdesigns

0

0

12,220

0

spoondrifters

0

0

2,729

Giorno 22 - TIRRENO Avete presente l’acerrima nemica di ieri sera per cui pensavamo di essere allenati? Bene. È stata peggio del previsto. L’onda lunga di mare morto creato dal vento dei giorni scorsi ci ha sballottati fino alle 2:30, ora in cui in preda allo sfinimento, per l’ennesima volta, abbiamo deciso di tirare su l’ancora e partire prematuramente. E così, alle 2:45, ci rimettiamo in marcia. Un po’ assonnati. Il motore romba a pieno regime, il vento è sul naso. Mancano 50 miglia. Al timone Cami, io riposo un po’. Arrivano le prime luci e mi alzo, le do il cambio. Devo dire che in questi quattro anni ha preso padronanza al punto da riuscire a dormire sereno e senza timori. Un tesoro prezioso per quando si devono macinare miglia. Le ore passano abbastanza monotone fino al momento in cui quella codina ballerina del windex decide di uscire dalle due alette. Cosa significa? Che si può andare a vela! Apriamo randa e Genoa e spegniamo finalmente il motore per la gioia del cuore e delle orecchie e per la tristezza dei benzinai😂 La barca vola. Non ricordo prestazioni così buone: 10 nodi di vento, 8 di avanzamento. Per una barca da crociera è ottimo! Vele a segno, condizioni ideali. Corriamo, galoppiamo, divoriamo terreno verso Palermo. Alle 14:30 ormeggiamo. Vado io all’ancora e lascio Cami al timone. Facciamo manovra, un po’ di retro finché non ci assicuriamo che l’ancora abbia fatto testa e ci tuffiamo in acqua. La giornata passa leggera, sono arrivati anche due poliziotti in moto d’acqua a fare due chiacchiere serene e accoglienti. La stanchezza è Comunque la protagonista della giornata vista la carenza di sonno. Si fa sera in fretta e noi ci godiamo una cenetta con il candido calore di una magliona felpata: la stagione dell’afa e dell’umidità appiccicosa è finita. Il tempo passa, le miglia aumentano, il viaggio diventa sempre più ricco di vita. Andrea

andreaecamilla

0

0

710