Arnot surfing the Hudson behind Leda with tivolisailing

0

0

0

36

In a surprising turn of events, I found myself in a racing competition with a bird, and as it turns out, this bird is faster than me. As I was out sailing on my sailboat, enjoying the sailing life and the beautiful views of Strangford Lough, I stumbled upon this speedy bird. The experience was exhilarating, and it reminded me of the thrill of sailboat racing and yacht racing that I've experienced in events like the Narrows Regatta. The sailing lifestyle is full of unexpected moments like these, and it's what makes sailing so much fun. Whether I'm sailing on a sigma yacht or a sailboat, I always feel alive and connected to nature. The sailing community is also very supportive, and I've met many like-minded people at the Strangford Lough Yachting Club who share my passion for sailing and yacht life. If you're interested in sailing and want to learn more about the sailing lifestyle, be sure to watch my other sailing videos for tips and stories from my adventures on the water. From close crosses to sailing away into the distance, every moment on the water is a thrill. So come along and join me on this journey as I explore the world of sailing and all its wonders, from the beauty of Strangford Lough to the excitement of sailboat racing and the joy of yacht life.

0

0

0

1,789

Höher, aber nicht höher...:-) Speed Test iQ Foil vs. Laser am schönen Lago Di Garda. Directed by Coach Klaus Lahme

0

0

0

3,020

0

0

0

0

1,940

Zum Lernen, eine Idee ist die Funktion Zufallswiedergabe der Playlists zu nutzen. For learning, a good idea is to use the random functionality of the play lists. Per l'apprendimento, una buona idea è utilizzare la funzionalità casuale delle playlist.

0

0

0

667

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145