close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Calção Crio

More than 20 submarines of capacity between 40 and 56 seats for each. air-conditioned and comfortable seats in a movable circular. From the bottom, a depth of 5 meters and over 18 panoramic windows, you will live a fantastic underwater experience on board the Seascope during an hour and half. Allow to take video and photos. Transfer by air conditioner vehicle and soft drink on board included. Egypt Sunmarine owns and operate Seascopes (20 semi-submarines) in Sinai and Red Sea in: Sharm el Sheikh, Dahab and Taba, Hurghada, Marsa Alam, Makadi Bay, El Gouna.

egyptsunmarine

0

0

1,346

0

rafcramatte

0

0

13,100

LMFAO #yachts #boats #boatshow #silentyacht #sailing #solar #solarenergy #solarelectric #victron #coupleschannel #youtubechannelforcouples #karaandnate #sailingyacht #sailingboat #lavagabonde #supercars #supercarblondie #gonewiththewynns #superyacht #enesyilmazer #waterfrontproperty #waterfrontrealestate #realestate #youtubeshorts #superyacht #liveaboard #travelvlog #alternativeliving #alternativelifestyle #nauticaldecor #retirementplanning #lifegoals

nautistyles

0

0

38,050

0

sailingbyefelicia

0

0

1,514

The knot commonly used to tie a fender onto the side of a boat to protect it from other boats and docks is called a "round turn and two half hitches." It is a simple and effective knot that provides a secure attachment for the fender. 👉Follow us for more tips about being a confident sailing cruiser! Here's how you tie a fender knot: 1. Start by passing the line's working end (rope) around a secure point on the boat, such as a cleat or railing. 2. Take the line's working end and make a loop around the standing part (the part of the line connected to the fender). 3. Pass the line's working end through the loop you just created. 4. Bring the line's working end around and make another loop around the standing part, similar to the first loop. 5. Pass the working end of the line through the second loop. 6. Tighten the knot by simultaneously pulling on the working end and the standing part. This knot will create a secure attachment for the fender, allowing it to protect the boat's side from impacts with other boats or docks. You can adjust the fender's height and position for optimal protection according to your specific docking situation. Follow us for more tips about being a confident sailing cruiser. #sailingexperience #boatknots #sailinglifestyle #short

sailingbritican

0

0

4,249

Motor sailor - Både sælges, Nauticat 33, 1977 DKK 338.000 Scanboat https://www.scanboat.com/en/boat-market/boats/motor-sailor-nauticat-33-17485906

scanboat24

0

0

687