close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Şort oluşturmak

"Dive into the charming world of manatees as one of these gentle giants takes a graceful sip of water. Witness the tranquility of nature as our aquatic friend hydrates in its own unique way. 🌊 #ManateeMagic #NatureMoments #WildlifeWonder"

unrestrainedlyfe

0

0

3,547

boatsdotcom

0

0

11,912

0

twodollarcatamaran

0

0

219

The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.

dieselhead24

0

0

855

Legacy grows when knowledge is shared 🌱 🌍 Pınar Coşkuner Genç reflects on the responsibility of guiding the next generation, from ensuring fair racing on the water to mentoring young sailors off it ⛵️ #GiveToGain #WomenInSailing #IWD2026

worldsailingtv

0

0

246

In our next @Dreamtimesail episode our new crew join us as we sail from Port Douglas to stunning Mackay Reef on our way north to the top of Australia. Out this Friday August 18

dreamtimesail

0

0

504