Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
Şort oluşturmak
0
0
0
0
10
Tranquille
0
0
0
54
No words. Just simple, step-by-step how-to content. This Tech Team Express Video shows you how to adjust the engage point on Harken Ratchamatic Blocks. To increase or decrease the load at which the ratchet engages, first, move the sheave so the hole in the sheave’s groove is at the bottom of the block. Insert a 2.5 mm Allen wrench and turn clockwise to engage at higher loads and counterclockwise for lighter loads. You will need to remove the becket before adjusting if it is a becket block.
0
0
0
4,571
0
0
0
0
883
At the start of the 2025 Lightship race, Hana Ho, a Santa Cruz 50, came down and just barely fit between our bow and the stern of the boat in front of them. If we had come down with them and sped up, we'd have closed the gap and put them in an unenviable spot. With 4 minutes left to the gun, it wasn't worth collecting the foul, but boy, this is right on the line between skill and just a dumb move, especially in PHRF where the boats accelerate and decelerate differently.
0
0
0
13,521
0
0
0
6
