Un bolide a vela accessibile a tutti! Scuola vela Andora Match Race www.andoramr.it

0

0

0

134

Sailingboat - Både sælges, X-362 X-Yachts, 2001 EUR 100.000 Scanboat https://www.scanboat.com/en/boat-market/boats/sailingboat-x-362-x-yachts-17517924

0

0

0

10,934

Avant de lancer la saison 2024, il est important de bichonner notre petit voilier. Alors on répare la faiblesse des fixation des cadènes et nous fabriquons de véritables renforts. Au menu, double dose avec une épaise stratification et un renfort en inox pour fixer les nouvelles cadènes Winchard !

0

0

0

619

The knot commonly used to tie a fender onto the side of a boat to protect it from other boats and docks is called a "round turn and two half hitches." It is a simple and effective knot that provides a secure attachment for the fender. 👉Follow us for more tips about being a confident sailing cruiser! Here's how you tie a fender knot: 1. Start by passing the line's working end (rope) around a secure point on the boat, such as a cleat or railing. 2. Take the line's working end and make a loop around the standing part (the part of the line connected to the fender). 3. Pass the line's working end through the loop you just created. 4. Bring the line's working end around and make another loop around the standing part, similar to the first loop. 5. Pass the working end of the line through the second loop. 6. Tighten the knot by simultaneously pulling on the working end and the standing part. This knot will create a secure attachment for the fender, allowing it to protect the boat's side from impacts with other boats or docks. You can adjust the fender's height and position for optimal protection according to your specific docking situation. Follow us for more tips about being a confident sailing cruiser. #sailingexperience #boatknots #sailinglifestyle #short

0

0

0

4,249

0

0

0

0

5,114

@sailingwithjosh

0

0

0

46