Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is invite only
contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account
শর্টস সৃষ্টি
Safety is key when climbing the mast onboard Linnea! And this is our version 2.0 🤯 Always use two lines in case one will fail! At the beginning we used two running halyards, which meant that the one on deck was controlling two lines at the same time, tightening one and then the other and so on. It worked, but it was a very time consuming solution and it wasn’t very safe either! Doing this instead, the one on deck only have one line to control. The prusik knot is controlled by the person in the mast, who simply just moves it along the static halyard (the one attached to the foot of the mast) while going both up and down. Simple as that! Let us know what you think of this! Do you think this is a good solution or do you have a better one you like to share? How do you do when you climb the mast? Don’t forget to save this video 🫶🏼
Would you challenge this yacht in a competitive offshore regatta or enjoy a spirited solo sail along the coast? Rate this yacht from 1–5 stars and comment below! X-Yachts X4³ MkII © X-Yachts Length overall: 13.24 m or 43 ft 5 in Hull length: 12.67 m or 41 ft 7 in Beam: 3.99 m or 13 ft 1 in Draft: 2.20 m or 7 ft 3 in Displacement: 9,400 kg or 20,723 lb Ballast: 3,700 kg or 8,157 lb Engine: 45 hp or 57 hp Fuel capacity: 200 L or 53 US gal Water capacity: 340 L or 90 US gal Sail area: 97 m² or 1,044 sq ft Cabins: 2-3 Berths: 4-8 persons The X-Yachts X4³ MkII represents the evolution of the Pure X range, combining the racing heritage of the Xp line with the cruising comfort of the Xc series. Built in Denmark using vacuum-infused epoxy and a signature galvanized steel hull girder, it offers superior structural stiffness and safety for offshore passages. The MkII generation introduces a redesigned transom and soft chines to improve form stability and interior volume. Danish craftsmanship defines the interior with Nordic Oak finishes and flush-fitting deck hatches that allow for an abundance of natural light. The deck layout is optimized for short-handed sailing, featuring a self-tacking jib and all control lines led aft to the twin helm stations for precise handling. This performance cruiser is engineered for sailors who demand a high-quality aesthetic and a fast, balanced ride in all sea conditions. The resale value for a well-maintained model typically begins at 1 million US dollars. #XYachts #X43 #PerformanceCruiser #HarbourMasters